Gestetner A294, Руководство по обслуживанию

Страница: 514 / 600

FIRMWARE HISTORY
A294/A295 7-56 SM
A294 / A295 FIRMWARE MODIFICATION HISTORY
No
.
Title DESCRIPTION OF MODIFICATION
SERIAL
NUMBER
SOFTWARE
VERSION
7 SC398 just after
turning on new
CD-R/RW When the new CD-R/RW is turned on with
the following conditions, SC398 is
displayed.
•
The CD-R/RW is the new model
MP7122SE. There is no problem with
the model MP7040.
•
A media is in the CD-R/RW.
•
The CD-R/RW and engine are turned
on in order.
<Instruction to customers>
Please instruct customers with the
following procedure:
1. Turn on the CD-R/RW
2. Wait until the LED for the drive access
is turned off.
3. Turn on the engine.
8 LEF (long edge
feed) in booklet
and APS modes
on Plokmatic
Booklet Finisher On the Plokmatic Booklet Finisher, when
the booklet and APS modes are selected,
a paper with LEF direction is fed prior to
SEF. This is because the engine does not
recognize that the Plokmatic Booklet
Finisher is installed.
<Solution>
•
Set SP6902 (Booklet staple) to “Yes”.
•
Set User Tools -> Copier/Document
Server Features -> General Features
-> Display/Panel Tone -> Staple
Position to “Bottom”.
The above 2 settings make the engine
recognize that the “Bottom” staple means
the “Booklet” staple. The indication of
“Bottom” on the operation panel is not
changed.
The following are additions and changes to the printer mode
9 Danish Names of
buttons are not
correct Some Danish names of buttons have
been corrected. Please install the
language software (A2945125F, version
8.2) at the same time.
10 Staple end
message “Staple end. Please add staples” message
has been added.
11 Full punch Dust
hopper message “Punch dust hopper is full. Please throw it
away” massage has been added.
12 Finisher shift
mode A message to set a shift mode to “for each
job and copy set”, “for each job” or “no
shift”, has been added to the SP mode.
⇒
Rev. 06/2002
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA