Gestetner A294, Руководство по обслуживанию

Страница: 245 / 600

Rev. 9/2001 SERVICE PROGRAM MODE
SM 4-23 A294/A295
Serv
ic
e
Ta
b
le
s
Mode No.
(Class 1, 2 and 3)
Function Settings
Transfer Current for Semi-thick Paper
Determines that the transfer current for
semi-thick paper is handled as Plain paper
or Thick paper
2-941
B
•
Setting this mode to “Thick paper” is
effective when image at the leading edge
is not good.
•
To use this mode, “Recycled paper”
should be selected in the User Tools for
semi-thick paper.
•
Selecting “Thick paper” in the User Tools
is the same effect as this mode. But
selecting “Thick paper” in the User Tools
does not allow the duplex or punch
mode.
0: Plain paper
1: Thick paper
Developer Initialization (Factory) 2-961
Factory use only.
Auto Process Control
Automatically adjusts the following process
control factors.
1. Drum potential sensor
2. ID sensor
3. Charge grid voltage (by changing V
D
)
4. LD power (by changing V
H
)
Before using this SP, auto process control
should be on (SP3-901).
2-962
B
After changing the drum, ID sensor, drum
potential sensor, LD unit, charge corona
wires, or toner density sensor, this SP
should be used.
Start
Periodical Auto Process Control 2-966
B
Selects whether auto process control is
done after the first job since 24 hours is
finished. This setting is required for a
customer who keeps the main switch on all
day. ON
OFF
Auto Image Density Adjustment
Selects whether auto image density
adjustment is done during machine warm
up. This mode is to counter dirty
background that occurs when a machine is
used in an area that contains ammonia.
2-967
B
If Periodical Auto Process Control (SP2-
966) is used, this adjustment is done also
after the auto process control is finished.
OFF
ON
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA