Gestetner A294, Руководство по обслуживанию

Страница: 597 / 600

DIFFERENCES FROM THE A294 I / A295 I MODELS
SM 11-11 A294/A295
A
2
94
II
/
A
2
95
II
Mode No.
(Class 1, 2 and 3)
Function Settings
Transfer Current On/Off Timing 2-911
2 Lb (On/Off
exchange
timing)
B
Adjusts the transfer current on/off
exchange timing.
(A294/A295
II models only)
[A294/A295 II ]
0 ~ +60
1 mm/step
+45 mm
Leading Edge Transfer Current Adjustment
1 Tray-1
2 Tray-2
3 Tray-3
4 Tray-4 (LCT)
5 Tray-5 (LCT)
6 Tray-6 (LCT)
2-940
7 Duplex Tray
B
Adjusts the leading edge transfer current
for each paper feed station.
(A294/A295
II models only)
10 ~ 200
1
µ
A/step
[A294 II ]
120
µµµµ
A
[A295 II ]
140
µµµµ
A
Transfer Current for Semi-thick Paper
Determines that the transfer current for
semi-thick paper is handled as Plain paper
or Thick paper
2-941
B
•
Setting this mode to “Thick paper” is
effective when image at the leading edge
is not good.
•
To use this mode, “Recycled paper”
should be selected in the User Tools for
semi-thick paper.
•
Selecting “Thick paper” in the User Tools
is the same effect as this mode. But
selecting “Thick paper” in the User Tools
does not allow the duplex or punch
mode.
0: Plain paper
1: Thick paper
Toner Density Correction 2-968
B
To prevent the image density dropping
during continuous copying after a long
interval (this is caused by a sudden
increase of Q/M), V
REF
is changed by –
0.06 V every (100 X (SP2-974 value + 1))
prints. This correction is applied from when
the auto process control is done, until “(the
number of prints set in this SP mode) X
(SP2-974 value +1)” has been made.
0 ~ 20 k
1 k prints/step
0
Toner Suction System 2-970
Displays whether the toner suction system
is installed in order to distinguish between
A294/A295
I and A294/A295 II.
[A294/A295 I ]
0: Not installed
[A294/A295
II ]
1: Installed
Collected Toner Level Check
Check this mode when “Waste toner full” pop-up message comes up or “Near full”
message is displayed.
1 Left Toner
Collection Bottle Display whether the used toner collection
bottle is full or not. 0: Not full
2: Full
2-971
2 Toner
Collection Bottle Display whether the sucked toner collection
bottle is full or not.
(A294/A295
II models only)
0: Not full
1: Near full
2: Full
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA