Gestetner A294, Руководство по обслуживанию

Страница: 522 / 600

ELECTRICAL COMPONENT DESCRIPTION
A294/A295 8-4 SM
1.3 ELECTRICAL COMPONENT DESCRIPTION
Symbol Name Function
Motors
M1
Upper Transport Drives the entrance rollers, the middle and upper
transport rollers, and upper tray exit roller.
M2
Lower Transport Drives the lower transport rollers, the alignment brush
roller, and the positioning roller.
M3 Jogger Moves the jogger fence.
M4 Stack Plate Drives the stack plate.
M5 Stapler Moves the staple unit from side to side.
M6 Stapler Rotation Rotates the stapler 45 degrees.
M7 Staple Hammer Drives the staple hammer.
M8 Stack Feed-out Drives the stack feed-out belt.
M9 Exit Guide Opens and closes the upper exit guide.
M10 Shift Tray Exit Drives the exit roller for the shift tray.
M11 Shift Moves the shift tray from side to side.
M12 Shift Tray Lift Moves the shift tray up or down.
M13 Punch Drives the punch shaft and roller.
Sensors
S1
Entrance Detects the copy paper entering the finisher and
checks for misfeeds.
S2
Pre-stack Tray
Paper Determines when to turn off the pre-stack paper
stopper solenoid.
S3
Stapler Tray
Entrance Detects the copy paper entering the stapler tray and
checks for misfeeds.
S4 Jogger Fence HP Detects the home position of the jogger fence.
S5 Stapler Tray Paper Detects the copy paper in the stapler tray.
S6 Stack Plate HP Detects the home position of the stack plate.
S7
Stapler HP Detects the home position of the staple unit for side-
to-side movement.
S8
Stapler Rotation HP Detects the home position of the stapler unit for 45-
degree rotation.
S9 Staple Hammer HP Detects the home position of the staple hammer.
S10 Cartridge Set Detects the staple cartridge in the stapler.
S11 Staple End Detects the staples in the cartridge.
S12
Staple Waste
Hopper Detects when the staple waste hopper is full.
S13
Stack Feed-out Belt
HP Detects the home position of the stack feed-out belt.
S14 Exit Guide Open Detects whether the guide plate is opened or not.
S15 Shift Tray Exit Checks for misfeeds at the shift tray.
S16
Stack Height 1 Detects when the top of the copy paper stack in the
shift tray is at the correct position.
S17
Stack Height 2 Detects when the top of the copy paper stack in the
shift tray has become too high.
S18 Upper Tray Exit Checks for misfeeds at the upper tray.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA