Gestetner A294, Руководство по обслуживанию

Страница: 235 / 600

Rev. 9/2001 SERVICE PROGRAM MODE
SM 4-13 A294/A295
Serv
ic
e
Ta
b
le
s
Mode No.
(Class 1, 2 and 3)
Function Settings
Side-to-Side Registration
Adjusts the printing side-to-side registration
from the 3rd paper feed station using the
trimming area pattern (SP2-902-3, No.15).
3 Tray-3
B
Use the “
•
” key to toggle b and –
before entering the value.
The specification is 0
±
2.0 mm.
+9 ~ –9
0.1 mm/step
–1.5 mm
Adjusts the printing side-to-side registration
from the 4th paper feed station using the
trimming area pattern (SP2-902-3, No.15). 4 Tray-4 (LCT)
B
Use the “
•
” key to toggle b and –
before entering the value.
The specification is 0
±
2.0 mm.
+9 ~ –9
0.1 mm/step
–2.5 mm
Adjusts the printing side-to-side registration
from the 5th paper station using the
trimming area pattern (SP2-902-3, No.15). 5 Tray-5 (LCT)
B
Use the “
•
” key to toggle b and –
before entering the value.
The specification is 0
±
2.0 mm.
+9 ~ –9
0.1 mm/step
–2.5 mm
Adjusts the printing side-to-side registration
from the 6th paper station using the
trimming area pattern (SP2-902-3, No.15). 6 Tray-6 (LCT)
B
Use the “
•
” key to toggle b and –
before entering the value.
The specification is 0
±
2.0 mm.
+9 ~ –9
0.1 mm/step
–2.5 mm
Adjusts the printing side-to-side registration
from the duplex tray using the trimming
area pattern (SP2-902-3, No.15).
1-002
7 Duplex Tray
B
Use the “
•
” key to toggle b and –
before entering the value.
The specification is 0
±
2.0 mm.
+9 ~ –9
0.1 mm/step
–3.0 mm
Paper Buckle Adjustment (Registration)
1 Copier Paper
Tray
B
2 LCT Tray
B
1-003
3 Duplex Tray B
Adjusts the relay clutch timing at
registration. The relay clutch timing
determines the amount of paper buckle at
registration. (A +ve setting leads to more
buckling.) +9 ~ –9
1 mm/step
+4.0 mm
Duplex Fence Adjustment 1-008
B
Adjusts the distance between the front and
rear fences. +4 ~ –4
0.5 mm/step
0.0 mm
Fusing Idling After Low Power Mode 1-103
B
Selects whether fusing idling is done or not
when recovering from the low power mode. 0: Not done
1: Done
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA