15
5
Please reboot your computer even if you are not prompted to do so.
Restarting your
computer ensures communications with the GERBER EDGE 2.
6
Click OK. Proceed to “Configuring the ports after OMEGA 2.6 installation” on page
31.
To complete a Custom Installation
1
Choose Custom as the setup type from the Setup Type dialog box. The Select Features
dialog box opens.
2
Choose the components you want to install. A check mark appears next to those
programs. The space required for each component is shown.
Tip: To deselect a program with a check mark, click the checkbox. The check mark disappears.
3
Click the Change button in the Select Features dialog box to open the Select Sub-
components dialog box. If a component does not have sub-components, the Change
button is disabled.
4
Choose the sub-components to load and click Continue in the Select Sub-components
dialog box to continue with the installation. The Select Components dialog box
reopens.
5
Follow the on-screen instructions in the Select Components dialog box. Click Next.