11
Installing OMEGA 2.6 software for New Users and
GRAPHIX ADVANTAGE upgrades
Installation Process:
♦
Connect the OMEGA 2.6 USB security key.
♦
Install OMEGA 2.6 software.
♦
Restart the computer to ensure communication with the GERBER EDGE 2.
♦
Configure the Sentinel System Driver.
♦
Install Fonts and Device Profiles.
Note: If your keyboard accelerators are hidden, do one of the following procedures to display
them. The procedures assume that Control Panel is in Category View rather than Classic View.
Windows 2000 - Click Start > Settings > Control Panel > Display > Effects. Turn off the check
box
Hide keyboard navigation indicators until I use the Alt key
.
Windows XP - Click Start > Control Panel > Appearance > Effects button. Turn off the check
box
Hide underlined letters for keyboard navigation until I press the Alt key
.
Windows Vista – Start > Control Panel > Ease of Access Center > Make the keyboard easier to
use > Make it easier to use keyboard shortcuts and access keys. Turn on the check box for
Underline keyboard shortcuts and access keys
.
To install OMEGA 2.6 software, (which is provided on a CD); use a CD-ROM drive for the
installation on a computer which is running Windows 2000, XP, or Vista. You must be logged
on as an Administrator to install software. Your kit contains the OMEGA 2.6 installation CD.
Although screen prompts guide you through the installation, we recommend reviewing the
installation process in the next few pages prior to installation. You may also wish to review
information in:
♦
Chapter Three: Adding Output Devices
– if you have a Gerber Sabre™ router and
you need to update the firmware.
♦
Chapter Six: HPGL Plotter Installation
- if you are using a plotter which is not
listed in the install screen. (Many different plotters are referred to as HPGL plotters
because they use the HPGL standard command set to communicate. See page 80.)
♦
Chapter Seven: Networking
Devices
- if you are using printers over a network.
