Administrator Mode
163
3
3.6.1.10 Enter Area / Leave Area
With Enter Area / Leave Area, an alarm is generated when a person or vehicle enters /
leaves the boundaries of the detection area. Note this function is only applicable to
GV-
BLFC5800
,
GV-EBD4813 / 8800 / 8813, GV-PTZ5810-IR, GV-TBL4810 / 8804 / 8810, GV-
TDR4803, and GV-TVD4810 / 8810
. It is also
NOT
recommended to overlap the detection
areas when adding multiple detection areas.
Select the checkbox next to
Enter Area
or
Leave Area
to enable and click
to configure.
Here we use
Enter Area
as an example.
Figure 3-52
1. Click
to mark the live view with a detection area. Repeat this step to add another
detection area (maximum of
4
).
2. Drag the nodes of the detection area to mark the boundary for detection.
3. For
Sensitivity
, drag the slider to adjust the detection sensitivity.
4. For
Detection Object
, select the type of object to detect when it enters / leaves area.
5. For
Filter Type
, select the type of object you want to define and its minimum or
maximum size for detection. Once selected, click
Max. Size
and/or
Min. Size
, drag the
nodes of the size area to adjust and the system will detect objects within that size range.
Repeat this step to define the size range for another type of object.
6. Under
Trigger Actions
, select
Upload Image (Original)
to automatically upload
snapshots to the specified FTP server. Depending on your model, select
A -> 1
,
Alarm
Sound
, or
Alarm Light
to trigger an output device upon people / vehicle / non-motor
vehicle detection.
Содержание GV-ABL Series
Страница 14: ......