Geotech ORS SITEPRO 2000, Инструкция по установке и эксплуатации

Страница: 50 / 56

49
Appendix A: Panel Configuration Sheet
This Appendix consists of an ORS Sitepro™ Panel Configuration Sheet to be used to record the final configuration of your
ORS Sitepro™ panel.
During the panel configuration procedures described in Chapter 3 of this manual, you will be changing the settings of
some of the dip switches shown in figure 16. Geotech recommends that you carefully record the final configuration of your
ORS Sitepro™ 2000 panel by penciling in the appropriate dip switch settings on the blank Panel Configuration Sheet
provided in this Appendix. Once filled out, this sheet will be a permanent record of your configuration and can be sued as
a check against inadvertent or unauthorized configuration changes. Be sure to update this sheet whenever configuration
changes are made. An up to date Panel Configuration Sheet is an essential troubleshooting tool and must be available for
reference whenever you call Geotech for technical assistance.
Network Configuration
ORS Sitepro™ 2000 Configuration Sheet
Date __________________
Panel Type __________________
Panel Network Address __________________
Before configuring any ORS Sitepro™ panel that is part of a complex multi-panel
network, basic decisions must be made about the design of the network as a whole.
Although remediation site design is beyond the intended scope of this manual, a Site
Configuration Guide has been included in your Quick Start Installation envelope. The
Site Configuration Guide is designed to help you specify panel network addresses,
interlock hookups and alarm interlock assignments for up to 16 ORS Sitepro™ control
panels. Fill out the blank Site Configuration Worksheet
BEFORE configuring individual
panels.