Gentex HGU-84/P, Инструкция по эксплуатации и обслуживанию

Страница: 27 / 62

3-4.2.1 Re place ment of TPL Cover or Layer As sem bly
MA TE RIALS RE QUIRED
QUAN TITY DE SCRIP TION REF ER ENCE NUMBER
1 Cover as sem bly, me dium
or
85D7088-1
1 Cover as sem bly, large
or
85D7088-2
1 Cover as sem bly, X-large
or
85D7088-3
1 Layer as sem bly, me dium
or
85D7518-1
1 Layer as sem bly, large
or
85D7518-2
1 Layer as sem bly, X-large 85D7518-3
As re quired Tape, dou ble-coated,
vi nyl, 1 x 2 inches
(25 x 50 mm
(ap prox i mately)
No. 419 (3M)
or equiv a lent
1. Re move TPL from hel met shell as sem bly.
2. Sep a rate TPL cover as sem bly from layer as sem bly.
3. Dis card de fec tive as sem bly.
4. Re move any dou ble-sided tape from ser vice able com po nent.
5. Re ferring to Fig ure 3-1, in stall new
dou ble-sided tape on layer as sem bly.
6. In sert the layer as sem bly into the cover
as sem bly. The end of the layer as sem bly with
the large holes is in serted into the wide end of
the cover as sem bly.
7. Se cure the cover and layer as sem blies
to gether with the dou ble-sided tape.
8. Re place TPL in the hel met shell as sem bly with
the wide end po si tioned to ward the front of the
hel met.
3-6
Fig ure 3-1. TPL As sem bly