UDP Technology
genetec.com | Omnicast Video Unit Configuration Guide 4.8 SR3
90
EN.100.007-V4.8.C3.(1)
UDP Technology
Complete the following configuration steps before adding UDP units to the Archiver:
1
Open the unit’s Web page.
2
Click
Basic Configuration tab > Web Server
.
3
Under
HTTP(S) Settings
, select the
HTTP
option and click
Apply
.
IMPORTANT
If this option is not enabled, automatic unit discovery will not work in
Omnicast.
4
Click the
Video & Audio
tab, and select
Codec
.
5
Under
Video Stream Codec Settings
, click the
First Stream
tab and select
H.264
from the
Video Codec
list, then click
Apply
.
6
Click the
Second Stream
tab, and select
MPEG4
from the
Video Codec
list, then click
Apply
.
7
Click the
System Options
tab, and select
RTSP/RTP
.
8
Select the
Does not include NAL unit header
option.
9
Click the
UNICAST
tab, and select
Enable RTP Session
.
10
Under
RTP Configuration-first stream
, make sure the
Session name
parameter displays
firststream
.
11
Under
RTP Configuration-second stream
, make sure the
Session name
parameter dis-
plays
secondstream
.
12
Click
Apply
.
