Panasonic
genetec.com | Omnicast Video Unit Configuration Guide 4.8 SR3
70
EN.100.007-V4.8.C3.(1)
5
Click
Close
.
6
To select an auto pan stop point, move the camera to the desired stopping point, and click
Specific Commands
(
).
7
In the
Specific Panasonic dome commands
dialog box, click
Set auto pan stop point
, and
click
Execute command
.
NOTE
The auto pan feature does not support tilt commands.
8
Click
Start autopan
, and click
Execute command
.
The camera pans between the two points you configured.
NOTE
When the camera is panning, clicking another PTZ command cancels the autopan.
The only exceptions are the Zoom commands.
9
To stop the auto pan, click
Stop autopan
, and click
Execute command
.
10
Click
Close
.
