Sony
genetec.com | Omnicast Video Unit Configuration Guide 4.8 SR3
84
EN.100.007-V4.8.C3.(1)
Configure Sony edge recording and video trickling
Video trickling is supported on Sony units with firmware 1.61 and later in Omnicast through the
Sony Edge Storage (edge recording) feature. To use edge recording and video trickling on Sony
cameras, you must enable the Edge Storage, and configure some additional settings on the unit’s
Web page.
1
Open the unit's Web page.
2
Click
Setup > Edge Storage
.
3
In the
Edge Storage
option, click
On
, and then click
OK
.
NOTE
If you set the
Effective period
option to
Always
, edge recording is stopped if you
change the video stream type.
4
Click the
Image memory
tab, and then click the
Common
tab.
5
In the
Image memory
option, click
Off
, and then click
OK.
6
Click the
Alarm recording
tab.
7
In the
Alarm recording
option, click
Off
, and then click
OK
.
8
Click the
Periodical recording
tab.
9
In the
Periodical recording
option, click
Off,
and then click
OK
.