General Equipment RIP-R-STRIPPER FCS16, Руководство оператора

Страница: 5 / 63

FCS16 RIP-R-STRIPPER
FORM GOM4240301, VERSION 3.1
3
Notice to Operators
IF YOU CAN NOT READ OR DO NOT FULLY UNDERSTAND THE CONTENTS OF
THIS MANUAL, PLEASE CONTACT THE FACTORY FOR PROPER ASSISTANCE
BEFORE ATTEMPTING TO OPERATE THIS PRODUCT.
SI TU NO PUEDES LE’ER O NO COMPRENDES EL CONTENIDO DE ESTE MANUAL
FAVOR DE PONERSE EN CONTACTO CON LA. FABRICA PARA ASSISTENCIA- A
PROPIA ANTES DE INTENTAR PARA OPERAR ESTE PRODUCTO.
SOLLTEN SIE DIESE GEBRAUCHSANWEISUNG NICHT LESEN KOENNEN ODER
ES NICHT VOLLKOMMEN VERSTEHEN, WENDEN SIE SICH BITTE AN DEN
HERSTELLER FUER RICHTIGE HILFE EHE SIE VERSUCHEN DIESES PRODUKT
ZU OPERIEREN.
SI VOUS NE LISEZ OU NE COMPRENDRE ENTIEREMENT LES MATIERES DE CE
MANUEL, S’IL VOUS PLAIT, CONTACTEZ L’USINE POUR L’ASSISTANCE
APPROPRIEE AVANT D’UTILISER LE PRODUIT.
These safety alert symbols identify important safety messages in this manual. When you see these symbols, be
alert to the possibility of personal injury and carefully read the message that follows.
Do not allow anyone to operate the RIP-R-STRIPPER without first reading this Operator Manual and becoming
familiar with its operation. The manufacturer of the RIP-R-STRIPPER has gone to great extremes to provide the
owner(s) and/or operator(s) with the finest equipment available for its intended job function of removing covering
materials from concrete and wood floor surfaces. Yet, the possibility exists that the RIP-R-STRIPPER can be
utilized in and/or subjected to job applications not perceived and/or anticipated by the manufacturer. Such misuse
and/or misapplication of the RIP-R-STRIPPER can lead to the possibility of serious damage, injury or even death. It
is the responsibility of the owner(s) and/or operator(s) to determine that the RIP-R-STRIPPER is being utilized
and/or operated within the scope of its intended job function. It is the responsibility of the owner(s) and/or
operator(s) to establish, monitor and constantly upgrade all safety programs and/or practices utilized in and for the
operation of the RIP-R-STRIPPER. The purpose of such programs is to provide for owner(s’) and/or operator(s’)
safety. Operators must be instructed to recognize and avoid unsafe conditions associated with their work (29 CFR
1926.21 (b)(2)) and/or applicable updated revisions. It is the responsibility of the owner(s) and/or operator(s) to
determine that no modifications and/or alterations have been made to the RIP-R-STRIPPER. Modifications and/or
alterations can lead to the possibility of serious damage, injury or even death. It is the responsibility of the owner(s)
and/or operator(s) to make this Operator Manual available for consultation during all phases of operation. Refer to
OSHA 2207 and/or applicable updated revisions which contains all OSHA job safety and health rules and
regulations (1926 and 1910) covering construction.
The concept of electrically powered, walk-behind type floor covering removal equipment has
been successfully utilized for many years as a practical solution to many types of floor
covering removal requirements. The basic concept is proven and well accepted within the
associated marketplaces. Use of a RIP-R-STRIPPER requires strenuous work activity. This
type of work activity can be considered to be greater in magnitude than that experienced with
the use of many other types of both light construction and lawn and garden related