General Equipment RIP-R-STRIPPER FCS16 Скачать руководство пользователя страница 11

Страница: 11 / 63

FCS16 RIP-R-STRIPPER

FORM GOM4240301, VERSION 3.1

Assembly

The FCS16 RIP-R-STRIPPER is shipped from the

factory secured on a specially designed wooden pallet

and protected from external damage by a corrugated

carton or wood crate. If shipped with a corrugated

carton, the Surface Grinder is secured to the pallet with

wood support strips. Remove the carton or crate

immediately upon receipt using suitable tools to

remove the nails.

REMOVING THE RIP-R-STRIPPER FROM

THE PALLET.

Tools Required:

1 each, cutting type pliers

1 each, claw hammer or a hammer and an appropriate

pry bar

Remove the corrugated carton which is fastened to the

pallet. The RIP-R-STRIPPER is secured to the pallet

with banding. Using the pliers, cut and remove the

banding. The RIP-R-STRIPPER can then be removed

from the pallet.

WEAR SAFETY GLASSES AND OTHER

APPROPRIATE SAFETY APPAREL WHEN

CUTTING THE BANDING AND/OR REMOVING

THE

CORRUGATED/WOOD

SHIPPING

CRATE.

Included in the shipment should be the following:

1 each, RIP-R-STRIPPER main frame assembly

1 each, extension cord with integral GFI

1 each, adjustable section of the operator handle

1 each, pack of standard blades

The RIP-R-STRIPPER is shipped from the factory

completely assembled with the exception of the

adjustable section of the operator handle. If ordered

with the RIP-R-STRIPPER, optional blades and

accessories can be shipped separately or included in

the shipping container.

Visually inspect the shipment for freight damage

and/or missing parts. If shipping damage is evident,

contact the delivering carrier immediately to arrange for

an inspection of the damage by its claims

representative. Federal law requires that a claim be

filed within a specific time period. If missing parts are

detected, notify your dealer or the Customer Service

Department who will assist you in obtaining them.

Check all fasteners for proper security. Consult a

fastener torque chart for the proper torque value if any

fastener is found to require retorquing.

INSTALLATION OF THE ADJUSTABLE SEC-

TION OF THE OPERATOR HANDLE.

The installation of the adjustable section of the

operator handle will require a level working surface of

sufficient size and appropriate height.

1) The RIP-R-STRIPPER incorporates an operator

handle design that folds for transport and storage. The

handle is secured to the main frame at two locations; a

pivoting (fixed) location secured by Allen head type cap

screws and a retaining (locking) location secured by

removeable, ball-detent type pins. The pins are

secured to the main frame by lanyards.

2) To place the operator handle in the work position,

move the handle upright so that the ball-detent pins

can be inserted through the operator handle and main

frame. Determine the ball-detent pins are properly

inserted through the operator handle and main frame

to fully expose the ball detent. FIGURE 1.

FIGURE 1

THE BALL DETENT MUST BE FULLY

EXPOSED AGAINST THE MAIN FRAME TO

PROVIDE THE PROPER PIN RETAINING

FORCE. AN IMPROPER PIN RETAINING

CONFIGURATION

CAN

RESULT

UNEXPECTED

OPERATOR

HANDLE

Содержание RIP-R-STRIPPER FCS16
































































Результаты поиска

Содержание RIP-R-STRIPPER FCS16

Отзывы:

Бренды по названию

Популярные бренды

General Equipment RIP-R-STRIPPER FCS16, Руководство оператора

Результаты поиска

Содержание RIP-R-STRIPPER FCS16

Отзывы:

Бренды по названию

Популярные бренды