General Equipment RIP-R-STRIPPER FCS16, Руководство оператора

Страница: 21 / 63

FCS16 RIP-R-STRIPPER
FORM GOM4240301, VERSION 3.1
19
7) All safety decals, Operator Manual and operational
information decals (including the applicable Quik Tips
information) must be in proper and readable condition.
Replace any missing or damaged safety decal,
Operator Manual and/or information decal with a factory
approved replacement part only.
TRANSPORTING THE RIP-R-STRIPPER.
The RIP-R-STRIPPER has an operational weight that
prohibits one person from loading and/or unloading it
alone by conventional, physical efforts.
DO NOT ATTEMPT TO LIFT THE RIP-R-
STRIPPER UP INTO A TRANSPORTATION
VEHICLE WITH THE USE OF ONE PERSON
ALONE. DO NOT ATTEMPT TO LOWER THE
R I P - R - S T R I P P E R F R O M A
TRANSPORTATION VEHICLE WITH THE USE
OF ONE PERSON ALONE. LIFT AND/OR
LOWER THE RIP-R-STRIPPER ONLY BY THE
USE OF A POWER TAILGATE UNIT, A
S U I TA B L E H O I S T U N I T O F P R O P E R
CAPACITY AND/OR CONFIGURATION OR BY
THE USE OF A PROPER QUANTITY OF
P E R S O N N E L I N P R O P E R
PHYSICAL/MENTAL CONDITION.
1) The RIP-R-STRIPPER can be hoisted by a
mechanical device incorporating a chain and suitable
attachment device to the lifting bail area located behind
the electric motor. FIGURE 18. This location may not
always locate the exact position of the center of gravity
for the RIP-R-STRIPPER. Lifting handles are also
provided on both sides of the main frame. These
handles can be utilized by personnel whenever
lifting/lowering the RIP-R-STRIPPER. FIGURE 19.
FIGURE 18
EXERCISE EXTREME CAUTION WHEN
UTILIZING A MECHANICAL DEVICE FOR
LIFTING THE RIP-R-STRIPPER. UTILIZE THE
MECHANICAL DEVICE IN ACCORDANCE TO
BOTH ITS DESIGNED STATIC AND DYNAMIC
LOADING ENVELOPES. DO NOT UTILIZE
THE MECHANICAL DEVICE UNTIL THIS
INFORMATION IS PROPERLY KNOWN AND
U N D E R S T O O D B Y A L L A P P L I C A B L E
P E R S O N N E L . FA I L U R E T O P R O P E R LY
UTILIZE THE MECHANICAL DEVICE CAN
RESULT IN PROPERTY DAMAGE AND/OR
PERSONAL INJURY.
Do not drop the RIP-R-STRIPPER directly
upon the exciter plate. Direct impact against
the exciter plate can result in damage to
components including the plate, elastomeric
r u b b e r m o u n t s , e l e c t r i c m o t o r s h a f t ,
bearings, etc.