General Equipment RIP-R-STRIPPER FCS16, Руководство оператора

Страница: 25 / 63

FCS16 RIP-R-STRIPPER
FORM GOM4240301, VERSION 3.1
23
IF THE RIP-R-STRIPPER IS EQUIPPED WITH
A TOGGLE TYPE ON/OFF SWITCH THE
MOTOR CAN RESTART IF THE ON/OFF
SWITCH IS NOT MOVED TO THE OFF
POSITION WHEN THE POWER SOURCE
LOOSES POWER AND THEN BECOMES RE-
ENERGIZED.
13) If the RIP-R-STRIPPER is equipped with a
magnetic start (push button) type ON/OFF switch, the
motor will not restart if the power source looses power
and then becomes re-energized unless the OFF
button is first pushed.
If the RIP-R-STRIPPER and/or an individual
component/accessory does not appear to be
functioning properly, STOP and do not
further operate the RIP-R-STRIPPER until
the proper corrective action has been
completed. If there are any questions
regarding the proper operation of the RIP-R-
STRIPPER, contact the Customer Service
Department BEFORE further utilization.
There is no charge for this service.
OPERATING THE RIP-R-STRIPPER ON THE
JOB SITE.
THE COVERINGS REMOVAL PROCESS CAN
PRODUCE EXCESSIVE NOISE, VIBRATION
AND FLYING DEBRIS. ALL OPERATORS
AND WORK PERSONNEL IN THE VICINITY
OF THE RIP-R-STRIPPER MUST WEAR
APPROPRIATE SAFETY EYE WEAR AND
HEARING PROTECTION DEVICES. OTHER
SAFETY APPAREL AND/OR PROCEDURES,
DEEMED NECESSARY BY SUPERVISORY
PERSONNEL MUST ALSO BE WORN
AND/OR PRACTICED BY ALL APPROPRIATE
PERSONNEL.
1) The RIP-R-STRIPPER utilizes an offset weight
design (termed the exciter) that moves the blade or
ceramic tile ripper attachment with a random orbit
oscillation. This design configuration substantially
enhances machine control and reduces fatigue as long
as the blade or ceramic tile ripper attachment does not
come in direct contact with a protruding obstruction
from the floor. Direct contact with such an obstruction
can result in rapid and jerky directional movement of
the machine. This occurrence can lead to loss of
machine control, property damage and/or personal
injury. In most operating situations, direct contact with
a protruding obstruction from the work surface will, at a
minimum, result in damage to the blade and/or ceramic
tile ripper attachment.
EXERCISE EXTREME CAUTION WHEN
OPERATING THE RIP-R-STRIPPER IN THE
VICINITY OF ANCHOR BOLTS, PIPES,
COLUMNS, OPENINGS, PROTRUDING NAIL
HEADS, LARGE CRACKS, UTILITY OUTLETS
OR ANY OBJECT PROTRUDING FROM THE
WORK SURFACE. CONTACT WITH SUCH
OBJECTS CAN LEAD TO LOSS OF MACHINE
CONTROL, RESULTING IN PROPERTY
DAMAGE AND/OR PERSONAL INJURY.
ALWAYS MAINTAIN PROPER CONTROL OF
THE RIP-R-STRIPPER. IF AN OPERATOR
LOOSES CONTROL OF THE MACHINE, A
“RUNAWAY” RIP-R-STRIPPER CAN RESULT
I N P R O P E R T Y D A M A G E A N D / O R
PERSONAL INJURY. BECAUSE OF THE
UNIQUE OPERATING CHARACTERISTICS
OF THE RIP-R-STRIPPER, THERE IS NO
PROVISION FOR THE ELECTRIC MOTOR TO
AUTOMATICALLY STOP IF THE OPERATOR
FAILS TO MAINTAIN PROPER CONTROL.
WHEN OPERATING THE RIP-R-STRIPPER
ON ABOVE GROUND FLOOR LEVELS,
E X E R C I S E E X T R E M E C A U T I O N T O
P R E V E N T L O S S O F C O N T R O L T H AT
COULD ALLOW THE MACHINE AND/OR
OPERATOR TO FALL DOWN TO LOWER
LEVELS. SUCH AN OCCURRENCE CAN
RESULT IN PROPERTY DAMAGE AND/OR
PERSONAL INJURY. WHEN WALKING
BACKWARDS DURING THE COVERING
REMOVAL PROCESS, BE AWARE OF DROP