General Equipment RIP-R-STRIPPER FCS16 Скачать руководство пользователя страница 16

Страница: 16 / 63

FCS16 RIP-R-STRIPPER

FORM GOM4240301, VERSION 3.1

PERSONAL INJURY.

3) Loosen the threaded handle knobs and extend the

operator handle out until it stops against the threaded

studs. Retighten the knobs. FIGURE 10.

FIGURE 10

Improper knob tension and/or improperly

securing the operator handle to the main

frame can result in an unstable platform

configuration. An unstable platform

configuration can result in property damage

and/or personal injury.

4) Tilt the RIP-R-STRIPPER back until the operator

handle comes in contact with the surface. The RIP-R-

STRIPPER may not be in a stable position in this

configuration. To minimize the possibility of property

damage and/or personal injury, properly secure an

appropriate weight to the handle for added stability.

Other means can also be utilized to support the frame

and provide proper machine stability. Appropriate

wheel chocks are also recommended. FIGURE 11.

E X E R C I S E E X T R E M E C A U T I O N W H E N

WORKING NEAR OR UNDER THE RIP-R-

STRIPPER WITH THE OPERATOR HANDLE

TILTED BACK IN THE SERVICE POSITION.

I F T H E R I P - R - S T R I P P E R I S N O T

P O S I T I O N E D

I N

S T A B L E

C O N F I G U R A T I O N , W I T H A D E Q U A T E

COUNTERWEIGHT PROPERLY SECURED,

UNEXPECTED MOVEMENT CAN ALLOW

THE MACHINE TO FALL BACK TO THE

WORK SURFACE. THIS OCCURRENCE CAN

RESULT IN PROPERTY DAMAGE AND/OR

PERSONAL INJURY.

FIGURE 11

5) Wear proper safety apparel and equipment. Use the

T-handled Allen wrench to loosen the button head cap

screws which secure the fence plate to the exciter

plate. This will allow the blade to slide in between the

fence plate and the exciter plate. IT IS NOT

NECESSARY TO REMOVE THE FENCE PLATE

FROM THE EXCITER PLATE. The fence plate has an

integral stop which the edge of the blade thrusts up

against. FIGURE 12. Blades are provided with a

covering that protects the cutting edge. Do not

remove the protective covering until you are ready to

operate the RIP-R-STRIPPER. Exercise extreme

caution when removing and/or reinstalling the

protective cover.

FIGURE 12

Содержание RIP-R-STRIPPER FCS16
































































Результаты поиска

Содержание RIP-R-STRIPPER FCS16

Отзывы:

Бренды по названию

Популярные бренды

General Equipment RIP-R-STRIPPER FCS16, Руководство оператора

Результаты поиска

Содержание RIP-R-STRIPPER FCS16

Отзывы:

Бренды по названию

Популярные бренды