General Equipment RIP-R-STRIPPER FCS16, Руководство оператора

Страница: 18 / 63

FCS16 RIP-R-STRIPPER
FORM GOM4240301, VERSION 3.1
16
BLADES ARE EXTREMELY SHARP.
CONTACT WITH THE BLADE CAN RESULT
IN PROPERTY DAMAGE AND/OR
PERSONAL INJURY. BLADES ARE
PROVIDED WITH A PROTECTIVE COVER
OVER THE CUTTING EDGE. EXERCISE
EXTREME CAUTION WHEN REMOVING
AND/OR REINSTALLING THE PROTECTIVE
COVER. STORE THE BLADE WITH THE
PROTECTIVE COVER PROPERLY
INSTALLED TO MINIMIZE THE POTENTIAL
FOR BLADE DAMAGE AND/OR PERSONAL
INJURY.
8) Return the RIP-R-STRIPPER to its normal operating
position.
9) Determine that the ON/OFF switch located on the
operator handle is in the OFF position. If the RIP-R-
STRIPPER is to be used immediately, then reconnect
the extension cord or RIP-R-STRIPPER to the power
source.
UNEXPECTED MACHINE START UP CAN
RESULT IN PROPERTY DAMAGE AND/OR
PERSONAL INJURY.
REMOVING THE BLADE OR CERAMIC TILE
RIPPER ATTACHMENT FROM THE RIP-R-
STRIPPER.
Tools Required: 1 each, 5/32 inch T-handled Allen
wrench provided with the machine.
WHEN INSTALLING OR REMOVING A BLADE
O R T H E C E R A M I C T I L E R I P P E R
AT TA C H M E N T T O / F R O M T H E R I P - R -
S T R I P P E R , A L W AY S W E A R T H E
A P P R O P R I A T E S A F E T Y E Y E W E A R ,
GLOVES, LEATHER SHOES AND LONG
PA N T S T O M A X I M I Z E P E R S O N A L
PROTECTION FROM THE SHARP EDGE(S).
IMPROPER CONTACT WITH A SHARP EDGE
CAN RESULT IN PROPERTY DAMAGE
AND/OR PERSONAL INJURY.
1) Properly disconnect the extension cord or the RIP-
R-STRIPPER from the power source.
2) To place the operator handle in the work position,
move the handle upright so that the ball-detent pins
can be inserted through the operator handle and main
frame. Determine the ball-detent pins are inserted
through the operator handle and main frame to fully
expose the ball detent. FIGURE 15
FIGURE 15
T H E B A L L D E T E N T M U S T B E F U L LY
EXPOSED AGAINST THE MAIN FRAME TO
PROVIDE THE PROPER PIN RETAINING
FORCE. AN IMPROPER PIN RETAINING
C O N F I G U R AT I O N C A N R E S U LT I N
U N E X P E C T E D O P E R AT O R H A N D L E
M O V E M E N T. T H I S O C C U R R E N C E C A N
RESULT IN PROPERTY DAMAGE AND/OR
PERSONAL INJURY.
3) Loosen the threaded handle knobs and extend the
operator handle out until it stops against the threaded
studs. Retighten the knobs. FIGURE 16.
Improper knob tension and/or improperly
securing the operator handle to the main
frame can result in an unstable platform
c o n f i g u r a t i o n . A n u n s t a b l e p l a t f o r m