Generac Power Systems G0071450, Руководство пользователя

Страница: 34 / 48

Maintenance
28 Owner’s Manual for 50 Hz Air-Cooled Generator Sets
Remove Intake Side Panel
See Figure 4-2 . The intake side panel (C) must be
removed to access the battery compartment, fuel regula-
tor, and sediment trap.
Figure 4-2. Remove Intake Side Panel
1. Raise enclosure lid and remove the front access
panel.
2. Use a 4 mm hex key to remove two mounting
screws (D) and the L-bracket screw (E).
3. Lift the intake panel up and away from the genera-
tor set.
NOTE: Always lift intake side panel straight up before
pulling away from enclosure. Do not pull intake side
panel away from the enclosure before lifting up (F).
Performing Scheduled Maintenance
It is important to perform maintenance as specified in the
Service Schedule for correct generator set operation.
Engine oil and oil filter must be changed, and valve clear-
ance adjusted after the first 25 hours of operation.
Emissions-critical maintenance must be performed as
scheduled in order for the emissions warranty to be valid.
Emissions-critical maintenance consists of servicing the
air filter and spark plugs in accordance with the
Service
Schedule .
The controller will prompt for Schedule A or Schedule B
maintenance to be performed. Schedule A maintenance
consists of the oil, oil filter, and battery check. Schedule B
maintenance includes the oil, oil filter, battery check, air
cleaner, spark plug(s), and valve clearance.
Since most maintenance alerts will occur at the same
time (most have two year intervals), only one will appear
on the control panel display at a time. Once the first alert
is cleared, the next active alert will be displayed.
005629
D
C
E
F