Generac Power Systems G0071450, Руководство пользователя

Страница: 12 / 48

Safety Information
6 Owner’s Manual for 50 Hz Air-Cooled Generator Sets
Installation
ISO000190
Installation must always comply with
applicable codes, standards, laws,
and regulations.
ISO000155a
Only a trained and licensed electrician
should perform wiring and connections
to unit.
ISO000178a
Always use a battery operated carbon
monoxide alarm indoors and installed
according to the manufacturer’s
instructions.
ISO000151a
Connection of fuel source must be
completed by a qualified professional
technician or contractor.
ISO000525
The generator set must be installed and
operated outdoors only.
ISO000192
Fuel and vapors are extremely
flammable and explosive. No leakage
of fuel is permitted. Keep fire and
spark away.
ISO000237
Use only approved switchgear to
isolate generator from the normal
power source.
ISO000152
Verify electrical system is properly
grounded before applying power.
ISO000218
Installation must comply with all
national and local electrical building
codes.
ISO000147
Unit must be positioned in a manner
that prevents combustible material
accumulation underneath.
ISO000532
Lift point. Install lifting attachments to
this location and only locations identified
as such. Do not connect lifting device
directly to the lift point.
ISO000538
Comply with regulations the local
agency for workplace health and
safety has established.
ISO000539
Verify the generator set is installed in
accordance with the manufacturer’s
instructions and recommendations.
Following proper installation, do nothing
that might alter a safe installation and
render the unit in noncompliance with
locally applicable codes, standards,
laws, and regulations.
ISO000540
ISO000150
Never connect this unit to the electrical
system of any building unless a licensed
electrician has installed an approved
transfer switch.
ISO000146
Do not alter construction of, installation,
or block ventilation for generator set.