9
Tone. Enter a valid Arm/Disarm code, then
press
. If a valid Arm/Disarm code is entered,
the keypad will beep 6 times, indicating the panel
has been disarmed. The red Armed LED will go
out. If an incorrect Arm/Disarm Code is entered,
the keypad will sound a 1-second tone, indicating
incorrect entry. Press the
key and re-enter
the code.
Disarming after an Alarm
(Alarm Memory)
The armed LED and the zone(s) that caused the
alarm will be be flashing. Disarm the panel. The
system is currently not detecting zone faults or
displaying system trouble. The zone(s) that
caused the alarm will continue to flash. The
STATUS and
SYSTEM TRBL LEDs are out
indicating:
The system is displaying Alarm Memory.
Press the
key to clear Alarm Memory.
%\SDVVLQJ
Automatic Bypassing
Home/Away with Delay Zones
This zone type has the following operation de-
pending on whether an
Exit/Entry Zone has been
violated during the
Exit Delay time.
Home
Exit/Entry Zone is not
violated
Zones selected as Home/Away with Delay
Zones will be bypassed automatically.
Away with Delay
E
xit/Entry Zone is violated
Zones selected as Home/Away with Delay
Zones will have a fixed 20-second entry
delay when violated before an
Exit/Entry
Zone.
Full Setting the System with Automatic
Bypassing - Home/Away with Delay
Zones
From the Keypad
Press
to return protection to
Home/Away with Delay Zones that have
been automatically bypassed. Three min-
utes are allowed to walk through
Exit/Entry
and
Exit/Entry Follower Zones.
Using A Keyfob (GEM-KF)
All zones in the system can be armed
regardless of the state of the
Exit/Entry
Zone when arming with a Keyfob and using
an AUX key programmed as Full Set.
Press
and press and hold the
or
keys for 1.5s when leaving the
premises. All zones, including
Home/Away
Zones are armed.
Bypassing a zone
Press the
key, then the zone number to be
bypassed. While the panel is DISARMED, the
bypassed zone LED will flash slowly; indicating
the zone has been bypassed. While the panel is
ARMED, the bypassed zones will only be dis-
played if the
Display Bypassed [21-3] option has
been selected.
Unbypassing a zone (Disarmed only)
Press the
key then the number of the
zone to be unbypassed.
Group Bypass
Press the
key to Bypass all
Exit/Entry
Follower Zones [02] or Home/Away Zones
[01] (only if the system is programmed exclu-
sively for
Home/Away with Delay zones).
.
Using A Keyfob (GEM-KF)
Hold the
or
key on the Keyfob to
Bypass all
Exit/Entry Follower Zones [02] or
Home/Away Zones [01] (only if the system is
programmed exclusively for
Home/Away
with Delay zones).
8VHU 3URJUDP 0RGH
To prevent the loss of the User 1 Code, the panel
default program includes
User 1 Code Lockout
[96-2].
To change the User 1 Code from its default value
Wi850a
page 9
Tuesday, September 16, 1997 08:01
