GE H
EALTHCARE
RAFT
V
OLUSON
E8 / V
OLUSON
E6
D
IRECTION
KTD102576, R
EVISION
7
DRAFT (A
UGUST
23, 2012)
S
ERVICE
M
ANUAL
10-8
Section 10-5 - System Maintenance
10-5-2-2
Peripheral/Option Checks
If any peripherals or options are not part of the system configuration, the check can be omitted.
Refer to
Table 3-7, “Approved Peripherals,” on page 3-54
for a list of approved peripherals.
10-5-2-3
Mains Cable Inspection
10-5-2-4
Optional Diagnostic Checks
Optionally you can access the diagnostic software as described in Chapters 5 or 7.
View the error logs and run desired diagnostics.
Table 10-5 Approved Peripheral/Hardware Option Functional Checks
Step
Item
Description
1
B/W Printer
Verify hardcopy output of the B/W video page printer. Clean heads and covers if necessary.
2
Color Printer
Verify hardcopy output of the Color video page printer. Clean heads and covers if necessary.
3
Color Deskjet
(Bluetooth) Printer
Verify hardcopy output of the Deskjet (Bluetooth) printer. Clean heads and covers if necessary.
4
VCR
Verify record/playback capabilities of the VCR. Clean heads and covers if necessary.
5
DVD recorder
Verify record capabilities of the DVD recorder. Clean heads and covers if necessary.
6
DICOM
Verify that DICOM is functioning properly. Send an image to a DICOM device.
7
Footswitch
Verify that the footswitch is functioning as programed. Clean as necessary.
8
DVD-Drive
Verify that the DVD-drive reads/writes properly
(export/recall image in Image Management System = Archive)
9
ECG
Verify basic operation with customer.
Table 10-6 Mains Cable Inspection
Step
Item
Description
1
Unplug Cord
Disconnect the mains cable from the wall and system.
2
Inspect
Inspect it and its connectors for damage of any kind.
3
Verify
Verify that the LINE, NEUTRAL and GROUND wires are properly attached to the terminals, and that
no strands may cause a short circuit.
4
Verify
Inlet connector retainer is functional.
