GE Ultrasonic USM Go, Руководство оператора

Страница: 71 / 190

Chapter 2. Instrument Setup
USM Go Operator’s Manual 53
2.5.2 Setting the Display Delay
The display delay function shifts the displayed A-Scan to the left or the right in the viewing window. To set the display delay:
1. In the
ACQUIRE
menu, activate the
RANGE
submenu using the joystick ( ).
2. Use the joystick ( ) to select the function titled DISPLAY DELAY .
3. Press the function toggle or move the joystick ( ) to change the display delay. As you change the value, you should see the displayed
echoes shift to the left or the right.
Note:
Pressing both buttons on the Function Toggle simultaneously resets the
DELAY
to the default value of
0
.
4. After completing your selection, move the joystick up or down ( ) to navigate away from this function.