PROTEUS XR/a
GE MEDICAL SYSTEMS
Operator Manual
REV 11
DIRECTION 2259724-100
5-10
5-2-3 Category Screen
To Name or Change a name of a Category:
1. Touch
the
Name Cat
button.
2. Touch the name of the category to be changed e.g. Chest
3. The screen will change to the keyboard screen.
4. Type in the new name of the procedure.
5. Touch
the
Done
button to exit out of the keyboard.
6. Touch
the
Edit Done
button to exit procedure edit.
Example of the keyboard screen:
ILLUSTRATION 5-8
EXAMPLE OF KEYBOARD SCREEN
Category Names can contain a combination of 18 characters or spaces.
The name appears between the brackets above the keyboard as it is
typed. The keyboard operation is similar to a typewriter.
•
Insert allows characters to be typed anywhere within the existing
text. Any characters to the right of the text will move over on
character at a time.
•
Delete Char removes the character to the left of the cursor.
•
Caps Lock switches text between small and capital letters.
•
Cancel lets you exit out of the keyboard screen without any changes.
•
This arrow button allows the user to skip down to the second
line of the text box.
•
Left, right, up and down arrows move the cursor in the direction of
the arrow.
•
Done saves the name and returns to the Procedure Edit screen.
Note:
You can only input English characters.
If the user is in the typewriter screen and does not want to change the
name touch the cancel button. Touching the done button will erase the
name.
To go to a Procedure Screen from the Category Screen:
1. Touch
the
Category Button
of the procedure.
2. The screen will change to the procedure screen.
3. Editing from the procedure screen can be done.
Note:
To change any procedure the procedure edit disk must be inserted
into the floppy disk drive.
FOR
TRAINING
PURPOSES
ONLY!
NOTE:
Once
downloaded,
this
document
is
UNCONTROLLED,
and
therefore
may
not
be
the
latest
revision.
Always
confirm
revision
status
against
a
validated
source
(ie
CDL).
