manualshive.com logo in svg

GE NX-4V2, Установка и запуск, Страница: 23 / 48

Поделиться
Скачать
GE NX-4V2 Скачать руководство пользователя страница 23

 

 

NX-4V2 Control 

 

23 

 

74 

EXPANDER TROUBLE / RESTORE COMM CODE 

4............. numerical 

Location 74 contains the digits for a 4+2 format that will be sent if "Expander Trouble Reporting" is enabled.  Segments 1 & 2 contain 
the digits of the "Expander Trouble Reporting".  Segments 3 & 4 contain the digits of the "Expander Trouble Restore".  (Box on pg 22.) 
 

 

75 

FAIL TO COMMUNICATE COMMUNICATOR CODE 

2............. numerical   

Location 75 contains the digits for a 4+2 format that will be sent if the "Fail To Communicate Reporting" is enabled.  (Box on pg 22.) 
 

 

76 

LOG FULL COMMUNICATOR CODE 

2............. numerical 

Location 76 contains the digits for a 4+2 format if the "Log Full Reporting" is enabled.  (Box on pg 22.) 
 

 77  OPENING 

COMMUNICATOR CODE 

8............. numerical 

Location 77 contains the digit of a 4+2 format if the "Opening Reporting" is enabled.

 

(Box on pg 22.) 

 

 78  CLOSING 

COMMUNICATOR CODE 

8............. numerical  

Location 78 contains the digit of a 4+2 format if the "Closing Reporting" is enabled. (Box on pg 22.) 
 

 

79 

AUTOTEST COMMUNICATOR CODE 

2............. numerical  

Location 79 contains the digits for a 4+2 format that will be sent if the "Autotest" or "Manual Test" is enabled. (Box on pg 22.) 
 

 

80 

RECENT CLOSING & EXIT ERROR COMM CODE 

2............. numerical 

Location 80 contains the digits for a 4+2 format that will be sent if "Recent Closing" and/or "Exit Error Reporting" is enabled.  Segment 
1 contains the digit for the "Recent Closing Reporting".  Segment 2 contains the digit for the "Exit Error Reporting". 

 

(Box on pg 22.) 

 

 

81 

START PROGRAM & END PROGRAM COMM CODES 

4............. numerical 

Location 81 contains the digits for a 4+2 format that will be sent if "Start / End Programming Reporting" is enabled.  Segment 1 
contains the digit for the "Start Program Reporting".  Segment 2 contains the digit for the "Start Program Reporting".  Segment 3 
contains the digit for the "End Program Reporting".  Segment 4 contains the digit for the "End Program Reporting".  (Box on pg 22.) 
 

 

82 

END DOWNLOAD COMMUNICATOR CODE 

4............. numerical  

Location 82 contains the digits for a 4+2 format that will be sent if "End Downloading Reporting" is enabled.  Segments 1 and 2 are 

Reserved

.  Segment 3 contains the digit of the "End Download Reporting".  Segment 4 contains the digit of the "End Download 

Reporting". (Box on pg 22.)   

Note

: A start download report will be sent to the internal event log.  

 

 

83 

CANCEL COMMUNICATOR CODE 

1............. numerical 

Location 83 contains the digit for a 4+2 format that will be sent if "Cancel Reporting" is enabled. Segment 1 contains the digit for the 
"Cancel Communicator Reporting".

  

(Box on pg 22.) 

 

 84-109 

RESERVED 

 
 
 

LOCATIONS 110-169 ARE USED TO CHANGE THE ZONE TYPES (Configurations) AS LISTED IN THE TABLE 

ON PAGE 16.  THESE LOCATIONS ARE CONSIDERED ADVANCED PROGRAMMING AND SHOULD 

ONLY BE CHANGED WITH A THOROUGH UNDERSTANDING OF THE OPERATION OF EACH BIT. 

 

 

110 

ZONE TYPE 1 ALARM EVENT CODE 

1............. numerical 

Location 110 contains the event code sent for a Contact ID or SIA report.  The desired event code should be chosen from the list on 
page 16. The zone ID will be that zone that is in alarm.   

4+2 Format Note

:  If 4+2 format is being used, the number programmed in this location will be sent as the upper hex digit.  The digit in 

location 110 should be from 1 to 15 when using 4+2 formats. The zone ID or user ID will be the lower hex digit of the zone that is in 
alarm. 

 

 

 

111 

ZONE TYPE 1 CHARACTERISTIC SELECT 

5............. feature select 

Segment 1: 

1 =  Fire (turn on if this is a fire zone). 
2 =  24 hour (turn on for non-fire 24 hour zones). 
3 =  Keyswitch zone. (normally open switch) 
4 =  Follower (turn on for burglary zones that are Instant during non-entry times). 
5 =  Delay 1 zone (follows timer 1 entry and exit times). 
6 =  Delay 2 zone (follows timer 2 entry and exit times). 
7 =  Interior (turn on if this zone should Automatically Bypass or Bypass for Stay Arming). 
8 =  Local only (turn on if this zone should not be reported). 

 

Segment 2: 

1 =  On if Zone Type will beep the keypad for alarm. 
2 =  On if Zone Type will sound the yelping siren for alarm. 
3 =  On if Zone Type will sound the temporal siren for alarm. 
4 =  On if Zone Type will chime. 

WWW.DIYALARMFORUM.COM

Содержание NX-4V2

















































Отзывы:

Нет отзывов