manualshive.com logo in svg

GE NX-4V2, Установка и запуск, Страница: 22 / 48

Поделиться
Скачать
GE NX-4V2 Скачать руководство пользователя страница 22

 

22 

 

NX-4V2 Control 

LOCATIONS 56- 83 ARE ONLY USED WHEN REPORTING EVENTS TO A PAGER OR USING A SLOW FORMAT SUCH AS 

4+2.  When using Contact ID or SIA, there is no need to program these locations. 

 
The digit programmed in each of the following locations will be sent as the upper HEX digit in place of the alarm event code.  The zone 
ID or user ID will always be reported as the lower HEX digit (1-F).  For example, if the zone ID or user ID is 3, the 4+2 lower digit will be 
“3”.  See Appendix 4 on page 41.   If the segment is left as “0” and the feature is enabled in Location 23, the NX-4V2 will report “A”. 

 

 56  RESTORE 

COMMUNICATOR CODE 

1 ............ numerical 

Location 56 contains the event code for any zone "Restore" for a 4+2 format.  (Box on pg 22.)

 

 

 

57 

BYPASS COMMUNICATOR CODE 

1 ............ numerical 

Location 57 contains the event code for a zone "Bypass" for a 4+2 format. (Box on pg 22.) 
 

 58  TAMPER 

COMMUNICATOR CODE 

1 ............ numerical 

Location 58 contains the event code for a zone "Tamper" for a 4+2 format.  (Box on pg 22.) 
 

 59  TROUBLE 

COMMUNICATOR CODE 

1 ............ numerical 

Location 59 contains the event code for a zone "Trouble" for a 4+2 format.  (Box on pg 22.)

 

 

 

60 

SENSOR LOW BATTERY COMMUNICATOR CODE 

1 ............ numerical 

Location 60 contains the event code for a zone "Sensor Low Battery" for a 4+2 format.  (Box on pg 22.) 
 

 

61 

SENSOR MISSING COMMUNICATOR CODE 

1 ............ numerical 

Location 61 contains the event code for a zone "Sensor Missing" for a 4+2 format. (Box on pg 22.) 
 

 62  DURESS 

COMMUNICATOR 

CODE 2 ............ numerical 

Location 62 contains the digits that will be sent for a 4+2 format if the “Duress” code is enabled in location 44.   (Box on pg 22.) 
 

 

63 

KEYPAD AUXILIARY 1 COMMUNICATOR CODE 

2 ............ numerical 

Location 63 contains the digits that will be sent for a 4+2 format if the keypad "Auxiliary 1" (Fire) is enabled in loc 23. (Box on pg 22.) 
 

 

64 

KEYPAD AUXILIARY 2 COMMUNICATOR CODE 

2 ............ numerical 

Location 64 contains the digits that will be sent for a 4+2 format if the keypad "Auxiliary 2" (Medical) is enabled in location 23. (Box on 
pg 22.) 
 

 

65 

KEYPAD PANIC COMMUNICATOR CODE 

2 ............ numerical 

Location 65 contains the digits that will be sent for a 4+2 format if the keypad "Panic" is enabled in location 23.  (Box on pg 22.) 
 

 

66 

KEYPAD MULTIPLE CODE ENTRY TAMPER COMM CODE 

2 ............ numerical 

Location 66 contains the digits that will be sent for a 4+2 format if the keypad "Multiple Code Entry" (Tamper) is enabled in location 23. 
(Box on pg 22.) 
 

 

67 

BOX TAMPER / RESTORE COMMUNICATOR CODE 

4 ............ numerical 

Location 67 contains the digits that will be sent for a 4+2 format if the "Box Tamper" feature is enabled in location 37. Segments 1 & 2 
contain the digits of the "Box Tamper".  Segments 3 & 4 contain the digits of the "Box Tamper

 

Restore".  (Box on pg 22.) 

 

 

68 

AC FAIL / RESTORE COMMUNICATOR CODE 

4 ............ numerical 

Location 68 contains the digits for a 4+2 format that will be sent if "AC Fail Reporting" is enabled. Segments 1 & 2 contain the digits of 
the "AC Fail".  Segments 3 & 4 contain the digits of the "AC Fail Restore".  (Box on pg 22.) 
 

 

69 

LOW BATTERY /  RESTORE COMMUNICATOR CODE 

4 ............ numerical 

Location 69 contains the digits for a 4+2 format that will be sent if "Low Battery Reporting" is enabled. Segments 1 & 2 contain the 
digits of the "Low Battery Reporting".  Segments 3 & 4 contain the digits of the "Low Battery Restore".   (Box on pg 22.) 
 

 

70 

AUX POWER OVERCURRENT / RESTORE COMM CODE 

4 ............ numerical 

Location 70 contains the digits for a 4+2 format that will be sent if "Aux Power Overcurrent Reporting" is enabled.  Segments 1 & 2 
contain the digits of the "Aux Power Overcurrent Reporting".  Segments 3 & 4 contain the digits of the "Aux Power Overcurrent 
Restore".  (Box on pg 22.) 
 

 

71 

BELL TAMPER / RESTORE COMMUNICATOR CODE 

4 ............ numerical 

Location 71 contains the digits for a 4+2 format that will be sent if siren supervision reporting is enabled. Segments 1 & 2 contain the 
digits of the "Bell Tamper Reporting".  Segments 3 & 4 contain the digits of the "Bell Tamper Restore".  (Box on pg 22.) 
 

 

72 

TELEPHONE LINE CUT / RESTORE COMM CODE  

4 ............ numerical 

Location 72 contains the digits for a 4+2 format that will be sent if "Telephone Line Cut Reporting" is enabled. Segments 1 & 2 contain 
the digits of the "Telephone Line Cut Reporting".  Segments 3 & 4 contain the digits of the "Telephone Line Cut Restore".  (Box on pg 
22.)  
 

 73  RESERVED 

 

 

 

WWW.DIYALARMFORUM.COM

Содержание NX-4V2

















































Отзывы:

Нет отзывов