manualshive.com logo in svg

GE NX-4V2, Установка и запуск, Страница: 15 / 48

Поделиться
Скачать
GE NX-4V2 Скачать руководство пользователя страница 15

 

NX-4V2 Control 

 

15 

 

L 

21 DOWNLOAD 

CONTROL 

1............. feature 

select 

Location 21 contains the feature selections for the controlling of download sessions. The following features can be enabled or disabled 
using this location. (Refer to Glossary beginning on page 35)  
 

Segment 1: 

1 =   On enables two call answering machine defeat. 
2 =   On enables tone sniff answering machine defeat. 
3 =   On requires call back before download session.  
4 =   Shutdown 
5 =   On locks all local programming 
6 =   On locks programming of all locations associated with the communicator 
7 =  On locks out download section. (If "On", locations 19 - 22 cannot be viewed from the keypad; can only be viewed from the 

keypad when "Off".) 

8 =   On enables call back at auto test interval. 

 

L 

22 

DOWNLOAD CALL BACK NUMBER 

20........... numerical 

If a telephone number is programmed into this location, and "Require Callback" is enabled in location 21, the control panel will hang up 
for approximately 36 seconds (ensuring that the calling party has disconnected), and then call back.  If tone dialing is desired, program 
an "15" in the segment where tone dialing should begin. If the entire number should be tone dialing, program an 

A

15" in the first 

segment.  Four-second delays can be obtained anywhere in the sequence by programming a "13" in the appropriate delay location.   
 

THE CALLBACK PHONE NUMBER SHOULD ALWAYS BE REVIEWED FOR ACCURACY BEFORE 
DISCONNECTING. 

 
 

L 

23 

FEATURE & REPORT SELECTIONS 5............. feature 

select 

Location 23 is used to enable certain features that can be accessed or are visible to the user from the keypad of the system.  In 
addition, certain communicator reports are enabled in location 23.  (For specific definitions, refer to the Glossary beginning on page 35) 
 

Segment 1:

 

 

1 =  On enables the Quick Arm feature. 
2 =  On enables the Re-exit feature. 
3 =  On enables the Automatic Bypass feature. 
4 =  On enables the Silent Keypad Panic feature 

(overrides the audible panic selection).

 

5 =  On enables the Audible Keypad Panic feature. 
6 =  On enables the Keypad Aux 1 feature (FIRE). 
7 =  On enables the Keypad Aux 2 feature (MEDICAL). 
8 =  On enables the Keypad Multiple Code Attempt Tamper feature. 

 

Segment 2:

 

 

1 =  On enables the LED Extinguish feature. 
2 =  On enables the Require Code for Bypassing feature. 
3 =  On enables the Zone Bypassed Sounder Alert feature. 
4 =  On enables the AC Power/Low Battery Sounder Alert feature. 
5 =  On enables Bypass toggle. 
6 =  On enables Silent Auto Arm. 
7 =  On enables the Automatic Instant feature. 
8 =  On enables Instant mode toggle.  (Applies to NX-1208E / NX-1248E keypads) 

 

Segment 3:

  

 

1 =  On enables Opening and Closing reports. 
2 =  On enables Zone Bypass reporting. 
3 =  On enables Zone Restore reporting. 
4 =  On enables Zone Trouble reporting. 
5 =  On enables Zone Tamper reporting. 
6 =  On enables the Cancel reporting. 
7 =  On enables the Recent Closing report. 
8 =  On enables the Exit Error report. 

 

Segment 4:

 

 

1 =  On enables Late to Close / Early to Open. 
2 =  On enables Auto Arm in Stay Mode. 
3 =  On disables the door delays in Night mode.  (Applies to NX-1208E / NX-1248E keypads) 
4 - 8 = Reserved. 

 

Segment 5:

 Reserved 

  

Options 4, 5, 6, 

and 7 can only be 
viewed from the 
keypad.  These options 
must be changed 
through downloading.

 

WWW.DIYALARMFORUM.COM

Содержание NX-4V2

















































Отзывы:

Нет отзывов