GE MOA 280i, Руководство по эксплуатации и обслуживанию

Страница: 48 / 211

GE Analytical Instruments ©2006 DLM 14291 Rev. A
4-14
•
Use the Down Arrow to scroll to Setup and press ENTER to display the Setup
Menu.
•
Select the Change option and press ENTER to display the Login Menu.
•
Select Operator and press ENTER to display the Change Setup Menu.
•
Scroll to Configuration and press ENTER.
•
Scroll to DATE and TIME and press ENTER.
•
To change the time, use the Down Arrow button to scroll to the hour field and
press ENTER.
•
Use the Arrow buttons to scroll to the current hour and press ENTER to save.
•
To change the minutes, use the Down Arrow button to scroll to this field, press
ENTER, then use the Arrow buttons to change the minutes and press ENTER to
save.
•
After setting the time, press CLEAR to return to the Configuration Menu.
Configuration Menu Options
The Configuration Menu contains two other menu options: Com Port and Pressure
Units. These options, along with the clock, and only be changed when the NOA is
in the Stop or Standby mode.
Com Port
The Com Port option is used to set the baud rate for communications with the
computer, with a default setting of 38400. This rate should be used for all
application unless, the computer used for data acquisition cannot be used at this
baud rate. Lower baud rates will limit the Com port intervals that can be used. At
19200 or 9600, the 1/32 interval cannot be used and some data loss may be
observed at an interval of 1/16.