manualshive.com logo in svg

GE M60, Инструкция по эксплуатации

Инфотел M60 - это удобное устройство для коммуникации, которое обеспечивает простую и быструю установку. Для более подробной информации и руководства по установке, вы можете скачать бесплатное руководство на нашем сайте.(manualshive.com) Не упустите возможность ознакомиться с руководством перед началом использования продукта.

Поделиться
Скачать
background image

CHAPTER 5: SETTINGS

PRODUCT SETUP

M60 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL

5-53

5

The Distributed Network Protocol (DNP) allows for the optimization of control and data acquisition between the equipment 
in the substation and the central control center. The protocol is scalable; that is, it is designed to be compatible with the 
latest high speed LAN technology yet still be implemented over slower speed serial links.
The DNP improves upon many master-slave protocols by improving overall communication performance requirements 
and provides time-stamping with millisecond accuracy.
The M60 supports the Distributed Network Protocol (DNP) version 3.0. DNP is enabled when the 

SETTINGS 

 PRODUCT SETUP 



 COMMUNICATIONS 

 PROTOCOL

 setting is set to DNP 3.0. The M60 can be used as a DNP slave device connected to 

multiple DNP masters (usually an RTU or a SCADA master station). Since the M60 maintains two sets of DNP data change 
buffers and connection information, two DNP masters can actively communicate with the M60 at one time.
DNP is not available using the USB port on the graphical front panel.
See the UR Family Communications Guide for more information on DNP.
The DNP Channels sub-menu is shown.

SETTINGS 

 PRODUCT SETUP 



 COMMUNICATIONS 



 DNP PROTOCOL 

 DNP CHANNELS

The 

DNP CHANNEL 1 PORT

 and 

DNP CHANNEL 2 PORT

 settings select the communications port assigned to the DNP protocol 

for each channel. Once DNP is assigned to a serial port, DNP is the only protocol running on that port; Modbus or IEC 
60870-5-103 are disabled. If DNP is assigned to RS485, the protocol must be set to DNP on the serial port configuration as 
well, for the change to take effect. When the 

DNP CHANNEL 1(2) PORT

 setting is set to “Network - TCP,” the channel 1(2) DNP 

protocol can be used over TCP/IP on the Ethernet ports. When this value is set to “Network - UDP,” the DNP protocol can be 
used over UDP/IP on channel 1 only. The "Front Panel - RS232" setting does not apply to the graphical front panel; when 
selected the DNP client cannot establish a connection on a USB port.
For any change to take effect, restart the relay.

The 

DNP ADDRESS

 setting is the DNP slave address. This number identifies the M60 on a DNP communications link. Assign a 

unique address to each DNP slave.

The M60 can specify a maximum of five clients for its DNP connections. These are IP addresses for the controllers to which 
the M60 can connect. The settings follow.

DNP OBJECT 23

DEFAULT VARIATION: 1

Range: 1, 2, 5, 6

DNP OBJECT 30

DEFAULT VARIATION: 1

Range: 1, 2, 3, 4, 5

DNP OBJECT 32

DEFAULT VARIATION: 1

Range: 1, 2, 3, 4, 5, 7

DNP NUMBER OF PAIRED

CONTROL POINTS: 0

Range: 0 to 32 in steps of 1

DNP TCP CONNECTION

TIMEOUT: 120 s

Range: 10 to 7200 s in steps of 1

DNP EVENT TIME BASE:

LOCAL

Range: UTC, LOCAL

DNP CHANNELS

DNP CHANNEL 1 PORT:

NONE

Range: NONE, COM1 - RS485, COM2 - RS485, FRONT 

PANEL - RS232, NETWORK - TCP, NETWORK - UDP

DNP CHANNEL 2 PORT:

NONE

Range: NONE, COM1 - RS485, COM2 - RS485, FRONT 

PANEL - RS232, NETWORK - TCP

Do not set more than one protocol to the same TCP/UDP port number, as this results in unreliable operation of 
those protocols.

Содержание M60





































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для M60

VADDIO EVI-D70 Installation And User Manual preview
EVI-D70
Бренд: VADDIO Страницы: 2
Caen V793 Technical Information Manual preview
V793
Бренд: Caen Страницы: 20
National Instruments NI cRIO-9036 User Manual preview
NI cRIO-9036
Бренд: National Instruments Страницы: 40
National Instruments cRIO-9063 Manual preview
cRIO-9063
Бренд: National Instruments Страницы: 28
National Instruments NI PXI-8104 Installation Manual preview
NI PXI-8104
Бренд: National Instruments Страницы: 7
National Instruments NI PXI-8840 Getting Started Manual preview
NI PXI-8840
Бренд: National Instruments Страницы: 22
Panamax M4000-PRO Instructions Manual preview
M4000-PRO
Бренд: Panamax Страницы: 16
SAI HVAC Compact Comfort VAV12 User Manual preview
Compact Comfort VAV12
Бренд: SAI HVAC Страницы: 16
Saitek Pacific AV8R Manual preview
Pacific AV8R
Бренд: Saitek Страницы: 15
saia-burgess PCD3 Series Hardware Manual preview
PCD3 Series
Бренд: saia-burgess Страницы: 203
Sailor N420 Technical Manual preview
N420
Бренд: Sailor Страницы: 1
Watts 709 Series Instruction, Installation, Maintenance And Repair Manual preview
709 Series
Бренд: Watts Страницы: 4
WaterCop SmartConnect Owner'S Manual preview
SmartConnect
Бренд: WaterCop Страницы: 4
Velleman KA01 Manual preview
KA01
Бренд: Velleman Страницы: 12
GBD BE24G Installation Instructions Manual preview
BE24G
Бренд: GBD Страницы: 60
turck TBEN-L 8IOL Series Instructions For Use Manual preview
TBEN-L 8IOL Series
Бренд: turck Страницы: 148
Bartec APEXpy 07-37A2-2111/ 520Series Operating Instructions Manual preview
APEXpy 07-37A2-2111/ 520Series
Бренд: Bartec Страницы: 98
Cardin Elettronica S486 Series Installation And Reference preview
S486 Series
Бренд: Cardin Elettronica Страницы: 56

Бренды по названию

Популярные бренды

Загрузить еще бренды