32
Advent Commercial Fire System
DTMF on Time
17031
(Phone-Advanced Dialog Screen)
(Default = 3 [30 ms]) Specify the minimum duration of a valid
DTMF (touch-tone) tone in 10 millisecond increments (1–100 x
10 ms). This is the minimum amount of time that a phone number
button must be pressed in order to be valid.
To set the DTMF on Time:
Once the item number has been entered, specify the minimum
tone duration (1–100). Press
ƒ
to apply the new setting.
DTMF off Time
17032
(Phone-Advanced Dialog Screen)
(Default = 5 [50 ms]) Specify the minimum duration of pause
between DTMF (touch-tone) tones in 10 millisecond increments
(1–100 x 10 ms). This is the minimum amount of time required
between two phone number buttons being pressed.
To set the DTMF off Time:
Once the item number has been entered, specify the minimum
duration between tones (1–100). Press
ƒ
to apply the new
setting.
Minimum Cycles in a Valid Ring
17054
(Phone-Advanced Dialog Screen)
(Default = 2 cycles) Specify the minimum number of cycles in a
valid ring.
To set the Minimum Cycles in a Valid Ring:
Once the item number has been entered, specify the minimum
number of cycles (0–255). Press
ƒ
to apply the new setting.
Number of Ringlets Needed for a Valid Ring
17055
(Phone-Advanced Dialog Screen)
(Default = 1 burst) Specify the number of ring bursts in a valid
ring.
To set the Number of Ringlets Needed for a Valid
Ring:
Once the item number has been entered, specify the number of
ring bursts (0–5). Press
ƒ
to apply the new setting.
Valid Ring at Beginning or End of Cycle
17091
(Phone-Advanced Dialog Screen)
(Default = off) Select to enable ring valid at beginning or end of
cycle.
To set the Valid Ring at Beginning or End of Cycle:
Once the item number has been entered, enter
1
to turn this
setting on (ring valid), or
0
to turn it off (ring not valid). Press
ƒ
to apply the new setting.
Maximum Ringlet Burst Duration
17020
(Phone-Advanced Dialog Screen)
(Default = 250 [2500 ms]) Specify the maximum duration of a
valid ring burst in 10 ms increments (3–300 x 10 ms).
To set the Maximum Ringlet Burst Duration:
Once the item number has been entered, specify the maximum
ring burst duration (3–300). Press
ƒ
to apply the new setting.
Minimum Ringlet Burst Duration
17019
(Phone-Advanced Dialog Screen)
(Default = 40 [400 ms]) Specify the minimum duration of a valid
ring burst in 10 ms increments (3–300 x 10 ms).
To set the Minimum Ringlet Burst Duration:
Once the item number has been entered, specify the minimum
ring burst duration (3–300). Press
ƒ
to apply the new setting.
Maximum Pause Between Ringlets
17022
(Phone-Advanced Dialog Screen)
(Default = 0) Specify the maximum duration between valid ring
bursts in 10 millisecond increments (0–300 x 10 ms).
To set the Maximum Pause Between Ringlets:
Once the item number has been entered, specify the maximum
duration between ring bursts (0–300). Press
ƒ
to apply the new
setting.
Minimum Pause Between Ringlets
17021
(Phone-Advanced Dialog Screen)
(Default = 0) Specify the minimum duration between valid ring
bursts in 10 millisecond increments (0–300 x 10 ms).
To set the Minimum Pause Between Ringlets:
Once the item number has been entered, specify the minimum
duration between ring bursts (0–300). Press
ƒ
to apply the new
setting.
Maximum Pause Between Rings
17024
(Phone-Advanced Dialog Screen)
(Default = 450 [4500 ms]) Specify the maximum amount of time
allowed between valid rings in 10 millisecond increments (100–
999 x 10 ms).
To set the Maximum Pause Between Rings:
Once the item number has been entered, specify the maximum
time between rings (100–999). Press
ƒ
to apply the new setting.
