Chapter 3: Programming
158
Vigilant VS1 and VS2 Technical Reference Manual
⇩
Enter Password
0000
⇩
Incremental Program
Loop Loop 1>
Label Devices No>
Label Zones No>
⇩
Auto Program
System Busy
################
<Back <Cancel
⇩
Devices Old/New
Loop 1 XXX/YYY
Loop 2 XXX/YYY
<Continue
-OR-
"Incremental programming options" table above.
Note:
Use the Right or Left Arrow button to make your selection
for each option. Do not use the Enter button. The Enter button
begins the incremental program operation no matter which
option the cursor is on. Also, the options you select are
preserved and will be displayed the next time you incremental
program.
6. When finished, press Enter.
The panel begins incremental programming and displays the
number of devices on your system. If you have more than one
loop, the device counts are per loop. The system displays the
number of old devices and the number of new devices.
7. Press Enter to continue.
Incremental programming continues based on the settings you
made above.
8. If you selected to label devices and/or zones, use the
procedures that follow to enter your labels.
9. When incremental programming is complete, the system
returns you to the banner screen.
Devices: Old/New
XXX/YYY
<Continue
Loop 1 Device 001
Label goes here
Label continued
<Save <Back
To label your devices:
1. Next to "Device," select the device (number) that you want to
label.
2. Enter a text label for the device (up to 40 characters and two
lines). The default label is "Loop X Device XXX."
3. Press Enter to save the label and go to the next device (number).
Note: Pressing the Enter button saves the current label and then
goes to the next device number so that you can quickly go to
each device and label it.
4. Enter a text label for the device (up to 40 characters and two
lines).
5. Repeat steps 3 and 4 until all devices are labeled.
6. When you are finished labeling, make sure the cursor is on the
device number, and press the Cancel button to exit and go to
the next incremental programming option.
