GCS CYSCAN Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 52

GCS CYSCAN Скачать руководство пользователя страница 39

37

CyScan Positioning System • Installation and Maintenance Guide r1.1

GCS

GCS

Appendix 6 - Using CyScan Admin Console

In addition to the usual CyScan Console (or CyScan User Console), a CyScan Admin
Console is also provided for making configuration changes, checking modules and
performing CyScan sensor software upgrades. This appendix provides brief details about
how to start and exit CyScan Admin Console.

Note: It is not possible to run CyScan User Console and CyScan Admin Console at
the same time.

To start CyScan Admin Console

1 If it is running, exit from CyScan User Console on the notebook computer.

2 Locate the CyScan Admin Console icon on the Windows desktop or select its entry

within the Start menu.

3 A pop-up dialog will be displayed:

4 Enter your access password and click Log In.

5 The main CyScan Admin Console will open to reveal a number of tabbed pages,

each providing information about distinct sections of the CyScan system.

• The Files tab, in particular is used to initiate software upgrades to the

CyScan sensor modules.

To exit CyScan Admin Console

1 When all necessary operations have completed, click the Shutdown button. The

following dialog will be displayed:

2 Click the Yes button to proceed. The CyScan Admin Console will exit and the

sensor will shutdown or continue, subject to the setting of the ‘keep sensor active
after shutdown’ option.

«
...
37
38
39
40
41
...
»

Содержание CYSCAN





















































Отзывы:

Нет отзывов