15
CyScan Positioning System • Installation and Maintenance Guide r1.1
GCS
GCS
Packing the CyScan System
With sensor disconnected and removed from its mounting plate, you can now begin to
pack it ready for shipping.
1 Locate the base and sides of
the wooden inner box in
which the CyScan sensor
was supplied. With the
assistance of another
person, lift the sensor into
the base of the inner box so
that the mounting holes of
the sensor base plate
correspond to the four
threaded inserts in the base
of the box.
2 Insert the four locking bolts. Using a 13mm
socket and ratchet, tighten the four bolts so
that the sensor is secure.
3 Locate the two end
bumper boards and
place them either side of
the sensor so that they
line up with correspond-
ing holes in the sides of
the box. The foam pads
on each of the bumper
boards should face
towards the sensor.
Insert the four screws
that secure each board
through the sides of the
inner box and tighten
with a crosshead screwdriver.
4 Place the lid of the inner box onto
base and sides and insert the
eight securing screws. Tighten the
eight screws using a crosshead
screwdriver.