GatesAir PT-353, Инструкция по установке и эксплуатации, Страница: 40 / 55

PT/PR-353 Module Installation & Operation Manual 4 – Remote Configuration & Operation
Version 1.1
4-10 GatesAir
Intraplex Products
Table 4-4. Analog Level Control for Both Channels
Binary
Value
Description
0000 +24 dBu*
0001 +23 dBu
0010 +22 dBu
0011 +21 dBu
0100 +20 dBu
0101 +19 dBu
0110 +18 dBu
0111 +17 dBu
1000 +16 dBu
1001 +15 dBu
1010 +14 dBu
1011 +13 dBu
1100 +12 dBu
1101 +11 dBu
1110 +10 dBu
1111 +9 dBu**
* Minimum gain on the PT-353 module and maximum gain for the PR-353 module.
** Maximum gain on the PT-353 module and minimum gain for the PR-353 module.
4.3.2 S Codes
S codes appear in response to an ISiCL STATUS? query. The command structure appears as
<Address>:<SCBaddress>:STATUS?:;
For example, :C3:STATUS?:; calls to SCB address number 3. The configuration of the card in the SCB
address is returned.
There are five S codes each for the PT-353 and PR-353 modules. A typical PT-353 or PR-353 response
to a STATUS? query looks like this example:
* OK
CHANNEL CARD 3, TYPE 116 (or 91, for PR-353)
>>>ALARM<<< (If there is one in effect)
S01 = 1 (B00000001)
S02 = 34 (B00100010)
S03 = 3 (B00000011)
S04 = 9 (B00001001)
S05 = 0 (B00000000);
Table 4-5 describes the contents of the PT-353 module S codes, and Table 4-6 provides the contents
of the PR-353 module S codes.