GatesAir PT-353, Инструкция по установке и эксплуатации, Страница: 15 / 55

No header here
GatesAir 3-1
Intraplex Products
Section 3 – Installation & Wiring
This section describes how to configure and use your PT/PR-353 modules. The procedures show how
to set up the modules for your system using “local control,” manually setting the module switches to
configure the parameters.
Note: Section 4 discusses remotely configuring and operating the PT-353 and PR-353 modules.
Before you install a module into an Intraplex multiplexer, you must first configure various module
operating parameters. Power supply and time slot considerations may affect installing these modules
in an existing multiplexer. Your specific Intraplex multiplexer installation and operation manual gives
more information.
3.1 Inspection
Inspect the module for shipping damage. If you suspect damage to the module, contact Intraplex
Customer Service:
● U.S., Canada, and Latin America: +1-217-222-8200 or●
Europe, Middle East, and Africa: +1-217-222-8200
● Asia and Pacific Rim: +1-217-222-8200
3.2 Installation
This section gives an installation procedure and guidelines to install the PT-353 and PR-353 modules in
local control using the modules’ five switches. Figures 3-1 and 3-3 show the component side of the
transmitter and receiver. Before starting the configuration, familiarize yourself with the two modules
using the modules themselves or Figures 3-1 through 3-4 to identify the location of the configuration
switch banks.
Figure 3-1. PT-353 Transmitter Front View