GatesAir Intraplex NetXpress Скачать руководство пользователя страница 115

Страница: 115 / 163

4—System Configuration and Operation

Intraplex NetXpress IP Multiplexer

Version 3.05

GatesAir, Inc.

4-61

Intraplex Products

Figure 4-66. Performance History Page

Refresh:

Click

to refresh the browser manually, or click

10s

, or

30s

to automatically refresh the

browser at 5, 10, or 30 second intervals.

ID/Index:

On the current statistics interval page, the ID is the identification number assigned by the

system that uniquely identifies each stream (ID). The system keeps individual stream statistics for 10
index intervals. Click the ID button to view all the statistics from all the statistics intervals for the stream
selected.

Op State:

Whether the stream is currently operational (in service).

Packet Count – Rx:

The accumulated number of packets received for the stream.

Packet Count – Tx:

The

accumulated number of packets transmitted for the stream.

Rx Packet Statistics – Recovered:

The number of packets recovered using Forward Error Correction.

Rx Packet Statistics – Lost:

The accumulated number of packets that were lost in the packet network.

Total underrun packets minus the sum of early and late packets.

Rx Packet Statistics – Under:

The accumulated number of times the system had to play out an

underrun packet in the time interval. An underrun condition can happen due to a lost, early, or late

packet.

Rx Packet Statistics – Early:

The accumulated number of packets that were discarded by the system

because they arrived too soon to play out.

Rx Packet Statistics – Late:

The accumulated number of packets that were discarded by the system

because they arrived after the playout time passed.

Rx Queue – Cur:

The current number of packets present in the jitter buffer at the instance the statistics

were sampled.

Rx Queue – Min:

The minimum number of packets that were present in the jitter buffer in the interval.

Rx Queue – Max:

The maximum number of packets that were present in the jitter buffer in the interval.

Rx Queue – Avg:

The average number of packets present in the jitter buffer in the interval.

Meas – PDV:

The Measured Packet Delay Variation, the average of maximum and minimum packets

present in the jitter buffer.

Clear Stats/History:

Click

on the header row of the

Streams

Statistics

table to clear all statistics

on the table. Click

on the stream row to clear all statistics for that stream. Click the

Clear

History

button on the

Performance

History

table to clear the stream statistics performance history for that

stream.

Close:

Click this button to close the

Performance History

page.

4.4.6.2 Voice Signaling Statistics

Click

Voice Signaling

on the

Performance

menu to access the

Voice Signaling Statistics

table

(Figure 4-67). This table shows state change, packet loss, and out of order information for voice signaling
streams.

Содержание Intraplex NetXpress




































































































































































Результаты поиска

Содержание Intraplex NetXpress

Отзывы:

Похожие инструкции для Intraplex NetXpress

Бренды по названию

Популярные бренды

GatesAir Intraplex NetXpress, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Intraplex NetXpress

Отзывы:

Похожие инструкции для Intraplex NetXpress

Бренды по названию

Популярные бренды