Gates OPTICAM 4S, Руководство по эксплуатации

Страница: 8 / 26

8
GATES.COM
OPTICAM 4S / OPTICAM 4S DP
OPERATING MANUAL
Before the device is returned the buyer must contact
Gates Tube Fittings GmbH and wait
for written permission and/or instructions from
Gates Tube Fittings GmbH on the handling
of the case.
Shipping and transport costs shall be borne by
the buyer and in the event of a valid and accepted
warranty claim these costs will be reimbursed to the
buyer and/or borne by Gates Tube Fittings GmbH.
INFO
In the event of an invalid warranty claim all fees and
costs shall be borne by the buyer.
All information and instructions in this user manual
are provided to the best of our knowledge under
consideration of our past experiences and findings.
The original version of this user manual was
provided in German and subject to objective
examination by us.
The translation into the respective country’s
language / contract language was carried out by an
accredited translation agency.
This user manual was compiled with the greatest
care. If you should however still fi nd examples of
inaccuracies and/or errors please inform us of this
in writing.
Your suggestions for improvement will help us create
a user-friendly and danger-averting user manual.
3.1 REORDER AND COPYRIGHT
Additional copies of this user manual can be ordered
at the address provided in Chapter 1 “Identifi
cation“. Please consider that a reorder will be
subject to a charge. All rights are expressly reserved.
Duplication or notifi cation to third parties, no
matter in what form, is prohibited without our written
permission.
4. PRODUCT SAFETY
A basic requirement for safe handling and trouble-
free operation of this equipment is knowledge of the
safety listed below.
4.1 BASIC SAFETY INFORMATION
The basic condition for the safety-conscious handling
and trouble-free operation of this device is the
knowledge that in the following basic safety
information.
DANGER!
Only one person may work at the cutting ring
assembly device. Other per sons must kept away
from the work area.
Only someone who possesses the necessary qualifi
cations for the work at hand and who possesses the
physical and mental capabilitiesis permitted to work
at the cutting ring assembly device.
The user manual must be read in full before
commissioning.
Before commencing any activity at the machine the
relevant guidelines of the suppliers, enclosed in the
user manual, must be read and observed.
DANGER!
The correct function of the cutting ring assembly
device must be examined prior to commissioning.
INFO
The electrical main switch carries out the function of
the emergency stop button.
4.2 ORGANISATIONAL MEASURES
This manual must be kept at the place of work of the
cutting ring assembly device at all times and in a
legible state!
The operator of the cutting ring assembly device
must constantly check all parts of the device as
well as all electrical and hydraulic lines for correct
function and perfect condition.
Any errors and damages that are ascertained must
be repaired immediately.