Gates OPTICAM 4S, Руководство по эксплуатации

Страница: 23 / 26

23
GATES.COM
OPTICAM 4S / OPTICAM 4S DP
OPERATING MANUAL
8. CLEANING AND MAINTENANCE
DANGER!
Only a specialist may fully separate the cutting ring
assembly device Opticam 4S from the power supply.
Before commencing repair and maintenance
measures on the machine the plug must be pulled
out to interrupt the power supply and be secured
against being unintentionally switched back on.
Operators and users must to arrange and maintain
the hall and industrial fl oor in such a manner to rule
out any risk of slipping.
The cutting ring assembly device Opticam 4S may
only be operated a person who possesses the
necessary physical and mental capabilities.
Unauthorised persons must be kept away from the
danger area during all life phases of the machine.
DANGER!
No poisonous cooling or lubricating substances may
be used on the machine.
Only tested operating and switching elements may
be used within the safety relevant area of the control
and switchgear facility.
The pneumatic cylinder is in principle
maintenance free.
An oil change must be carried out after
approximately 2000 operation hours.
The device was pre-fi lled with BP HP - C 32 hydraulic
oil. Please refer to the performance data for the
filling volume.
The hydraulics requires an oil change every 3 years
or every 1000 hours of operation. The hydraulic oil
used must exhibit a viscosity of 32.
When filling up the oil a sieve must be used (mesh
width 0.4 mm). The oil level should be checked
at regular intervals depending on the hours
of operation.
The filler neck is located under the housing (black
plastic cover of the device).
The hydraulic hoses must be renewed every 6 years.
The date of manufacture is printed on the hose.
DANGER!
The tools must be checked at regular intervals,
drawing on lessons learnt, for proper functionality.
The user must constantly check all machine parts
and supply lines for correct function and soundness.
Damages must be repaired immediately.