Gates OPTICAM 4S, Руководство по эксплуатации

Страница: 14 / 26

14
GATES.COM
OPTICAM 4S / OPTICAM 4S DP
OPERATING MANUAL
7. OPERATION
Never move the cutting ring assembly device
Opticam 4S with clamped in material!
DANGER!
The operator must convince himself of the
soundness of the device prior to each work shift.
Operators and operators must arrange and maintain
the hall and operating fl oor in such a way so as to
rule out the danger of slipping.
The cutting ring assembly device Opticam 4S may
only be operated by a person who possesses the
necessary physical and mental capabilities.
Unauthorised persons must be kept away from the
danger area during all life phases of the machine.
The work times of the operating personnel
are to be calculated under consideration of
the local conditions in such a way as to rule
out the consequences of a fatigue and being
underchallenged.
DANGER!
All operating and display elements are to be lit
up glare-free in all life phases of the cutting ring
assembly device Opticam 4S.
The markings attached to the machine are to be
kept constantly in a legible state.
The operator of the machine must ensure that the
surrounding conditions on:
- Temperature, - Draft, - Breathing air cause do not
cause any impairment to the operating personnel.
DANGER!
An increase in humidity in the machine’s
surroundings must be avoided, since it can lead
to substantial wear of the machine and hazards
for personnel.
Corrosion can impair the function of the cutting ring
assembly device Opticam 4S.
DANGER!
If any disturbance should occur the operator must
immediately implement repair works.
If unusual noises and vibrations are detected at the
machine, troubleshooting, repair and if necessary
partial replacement must be carried out.
No poisonous cooling substances or lubricants may
be used on the machine.
7.1 THE WORK AREA
The work area of the operator is next to the cutting
ring assembly device, where the control panel is
mounted and where all function components of the
device can be easily accessed.
7.2 DESCRIPTION OF THE USER INTERFACE
7.2.1. Start screen
The following screen is displayed automatically or
after touching the control panel (screen).