Gates OPTICAM 4S, Руководство по эксплуатации

Страница: 10 / 26

10
GATES.COM
OPTICAM 4S / OPTICAM 4S DP
OPERATING MANUAL
Interface
Foot switch
Mains power
supply
Meaasurement
connection
Terminal strip
Backing plate receiption
Mounted proximity switch
Assembly socket
Backing plate
Foot switch
The machine can furthermore be equipped with a
foot switch to activate the assembly process.
4.5.1 Components of machine
The cutting ring assembly device Opticam 4S
consists of the following components:
ƒ
Hydraulic unit
ƒ
Press tool
ƒ
Control and operation
4.5.2 Intended use
The cutting ring assembly device Opticam 4S
may only be used for the following purposes: final
assembly of Gates – cutting rings on hydraulic steel
tubes acc. DIN EN 10305-4 (E235, St 37.4) and
stainless steel tube acc. DIN EN 10216-5 / ISO
1127, dimensional tolerance class D4/T3 (316TI,
1.4571). Any other use is considered an unintended
use and will lead to the loss of to all warranty,
guarantee and damage claims.