Gates OPTICAM 4S, Руководство по эксплуатации

Страница: 15 / 26

15
GATES.COM
OPTICAM 4S / OPTICAM 4S DP
OPERATING MANUAL
7.2.2 Main menu
The program indication: can be red or green
Red: No program has been selected
Green: A program is selected and the program
named is displayed
The program name appears also in the screen
“program selection“
The administrator can change the programs and
their names.
7.2.2.1 Factory-installed programs
The following programs have been installed
as standard:
1 DS-Stahl/ Steel/ Acier
2 Programm 2
3 DSW
4 DS-1.4571/ 316TI
7.2.2.2 „Tool“ indication
Red: No tool is mounted
Green: A tool is mounted and its name is given here.
(A tool consists of the backing plate and the press
tool mounted at the piston rod; they are designed as
a pair and are solely to be used as such)
7.2.2.3 Tool list
The machine is set up as standard for the use of the
following tools:
VALUE TEXT VALUE TEXT VALUE TEXT
1
Spe-
cial plate 1
13 10-L 25 16-S
2
Spe-
cial plate 2
14 8-L 26 15-L
3
Spe-
cial plate 3
15 6-S 27 14-S
4
Spe-
cial plate 4
16 42-L 28 12-S
5 4-LL 17 38-S 29 10-S
6 5-LL 18 35-L 30 8-S
7 6-LL 19 30-S 31
Not
occupied
8 8-LL 20 28-L
9 10-LL 21 25-S
10 12-LL 22 22-L
11 6-L 23 20-S
12 12-L 24 18-L
7.2.2.4 Error messages
The current error message is displayed in the yellow fi
eld where applicable:
ID MESSAGE TEXT
1 Interference in the light grid
10 Motor protection switch pump triggered
20 Position detection > target
21 Position detection < target
22 Final pressure < target
23 Final pressure > target
24 Assembly abort
25 Position sensor no change in route
26
Watchdog timing position detection/cutting
commencement/basic program
27 Watchdog timing start program
28 Watchdog timing reference drive
29 Reference not available
30 No work piece inserted
31 Maintenance due!
40 Program selection was not transferred