Gates OPTICAM 4S, Руководство по эксплуатации, Страница: 21 / 26

21
GATES.COM
OPTICAM 4S / OPTICAM 4S DP
OPERATING MANUAL
Counterplate into reception
Assembly socket into reception
And secure with pin
The assembly socket is mounted into the reception
and locked by a pin.
The corresponding counter plate is put into its
reception. The 5-whole code must be on the
right side.
7.4.2 Carry out reference run
see chapter 7.2.3
7.4.3 Select program
see chapter 7.2.4 + 7.2.4.1
7.4.4. Assembly
Slide nut and cutting ring onto tube. The has to be
cut rectangular and slightly deburred. It is essential
to ensure that the shoulder of the cutting ring (the
thicker part) shows towards the nut.
Nut an cutting ring onto tube
Positioning of cutting ring
Put in the tube. Nut and cutting ring is located
between assembly socket and counter plate. Push
tube firmly into assembly socket.
Put in tube