Gates OPTICAM 4S, Руководство по эксплуатации

Страница: 22 / 26

22
GATES.COM
OPTICAM 4S / OPTICAM 4S DP
OPERATING MANUAL
Final assembled cutting ring
Press the green start button during the whole
process. If you release the button the machine
interrupts the process. Take out the assembly and
check the result like described in the box below.
Start button
When using a proximity switch the process is started
by pushing the tube against assembly socket. Also
releasing leads to interruption of process.
In case of interruption you reset the machine by
pressing F3 (Reset).
After returning the piston take the assembled tube.
INFO
If the cutting ring can be turned on the pipe after fi
nal assembly it is irrelevant.
What is important is the correct shoulder throw-up in
front of the cutting ring. See photo “Fully assembled
cutting ring”.
In order to increase the lifespan of your tools we
recommend oiling the assembly connecting piece
before the assembly procedure.
During the assembly of stainless steel it is essential
to use lubricant.