Gates OPTICAM 4S, Руководство по эксплуатации, Страница: 17 / 26

17
GATES.COM
OPTICAM 4S / OPTICAM 4S DP
OPERATING MANUAL
The “start reference run” button can appear in either
red or green,
Red: Reference run cannot be started, a
disturbance is given.
Green: Reference run can be started.
7.2.3.1 Text list reference run
Start reference run
Reference run is being carried out
Reference available
If the reference drive were implemented, the
announcement jumps automatically again into
the main menu.
7.2.4 Program selection
Here you can see the programs activated by the
machine setter. Select a program by pressing
the program key. The facility jumps back to
the main menu.
7.2.4.1 Programs
The following programs are installed as standard:
1 DS-Stahl/Steel/Acier
2 Programm 2
3 DSW
4 DS-1.4571/316TI
7.2.5 Assembly data
After pressing the button the following appears
The information form the last 10 cutting ring
assemblies can be seen one at a time. By pressing
the buttons the
>>> >>>
buttons you can call up
the next and previous page of assembly data.
7.2.6 Setup
After pressing the grey “setup“ button the following
screen appears
In this screen the operator can call up the following
information pages
ƒ
Counter
ƒ
Language selection
ƒ
Software information
The menus not described are locked for the operator.