Gates OPTICAM 4S, Руководство по эксплуатации, Страница: 25 / 26

25
GATES.COM
OPTICAM 4S / OPTICAM 4S DP
OPERATING MANUAL
11. EEC DECLARATION OF
CONFORMITY
The manufacturer hereby declares that the product:
Cutting ring assembly device Opticam 4S/4S DP is
in conformity with the applicable requirements of the
relevant regulations of the following EEC Directives
including any amendments relevant at the time of
the declaration:
Directive 2006/42/EC of the European
Parliament and of the Council of 17 May 2006
on machinery, and amending Directive 95/16/EC
(Machinery Directive)
Directive 2014/68/EC of the European Parliament
and the Council of 15 May 2014 on the
harmonisation of the laws of Member States relating
to the making available on the market of pressure
equipment (Pressure Equipment Directive)
Directive 2014/35/EC of the European Parliament
and of the Council of 26 February 2014 on the
harmonisation of the laws of the Member States
relating to the making available on the market of
electrical equipment designed for use within certain
voltage limits (Low Voltage Directive)
Directive 2011/65/EU of the European Parliament
and of the Council of 8 June 2011 on the restriction
of the use of certain hazardous substances in
electrical and electronic equipment (ROHS Directive)
and that the harmonised standards specifi ed below
have been applied:
DIN EN 60204-1:2005 + A1:2008 Safety of
machinery – Electrical equipment of machines –
Part 1: General requirements
DIN EN ISO 13857 Safety distances to prevent
hazard zones being reached by upper and
lower limbs.
DIN EN ISO 4413:2011 - 04 Hydraulic fl uid power-
General rules and safety requirements for systems
and their components (ISO 4413:2010); German
version EN ISO 4413:2010
Information on the signatories:
Managing director: Semih Kelle
Authorised to compile the technical documentation