background image

EN

EN

10

11

IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES

Place the appliance near a suitable wall power outlet. Connect the appli-

ance directly to a protected mains power supply with protective conduc-

tor (earth/ground) connected properly. Ensure that the voltage rating of 

your mains power supply corresponds to the voltage requirements of the 

appliance (220 - 240 V AC; 50 - 60 Hz; at least 16 A). The power outlet 

socket must be installed separately from other power outlet sockets to avo-

id interference with other appliances.
The installation of a residual current operated circuit breaker (r.c.c.d.) 

with a maximum rated residual operating current of 30 mA in the supp-

lying electrical circuit is strongly recommended. If in doubt, contact your 

electrician for further information.
•  In various foreign countries, the specifications for power supplies are 

subject to incompatible norms. Therefore it is possible that power sup-

plies in foreign countries do not meet the requirements for safe opera-

tion of the appliance. Thus, before operating the appliance abroad, 

ensure that safe operation is possible.

•  Do not use any desk top multi socket outlet, external switching device, 

remote control system, or extension cord to avoid risk of fire or electric 

shock. Ensure that the power outlet socket used is always accessible for 

unplugging the appliance immediately in case of malfunction or danger.

•  The appliance may not be operated on metal surfaces. Do not touch 

the plugs of the power cord or the appliance with wet hands, while 

the appliance is connected to the power supply.

•  Always completely unwind the power cord before use. Power cords 

may never be knotted, twisted, strained or squeezed. The power 

cord may not touch hot surfaces, sharp edges or moving parts. Do 

not let the power cord hang over the edge of the table or counter. 

Ensure that no one will pull the appliance by the power cord or gets 

entangled in the power cord. Always grasp the power plug, when 

disconnecting the power cord. If the power cord is likely to be dama-

ged, it must be replaced. 

Do not attempt to repair the power cord!

•  DO NOT pour or spill any liquids on or under the housing of the 

appliance or the power cord. Do not place or immerse the appliance, 

power cord, or power plug in water or other liquids. Do not overfill 

the water tank (max. 2.5 litres; MAX marking) to avoid overflow.

•  Ensure to empty the drip tray in time. Do not operate the appliance 

without the drip tray correctly in place. Otherwise, water could run 

out and cause hazards due to overheating, fire and electric shock. 

Always wipe off spilled liquids immediately. If liquids run out or are 

spilled on the housing: Always immediately unplug the appliance first. 

Thereafter, wipe dry and let the appliance dry naturally for at least 1 

day. If in doubt, carefully check the appliance for leakage.

HIGH TEMPERATURE – RISK OF BURNS

Your new Design Espresso Barista Touch is designed for brewing coffee 

(extracting espresso) and texturing (frothing) milk. During operation, the 

appliance presses hot water and steam out of the group head / filter 

holder or steam wand. Thus, these parts will be very hot during opera-

tion and some time thereafter. Even some time after operation and duri-

ng the start procedure after switching on, hot steam and hot water may 

escape under high pressure from the group head and steam wand. Strict-

ly, adhere to the following precautions for avoiding scalds and damage. 
•  Do not hold your hands, arms, and any delicate objects on or near 

the steam wand, metal parts of the group head or filter holder or 

under the group head, while the appliance is in operation and 

some time thereafter. Do not point the steam wand to persons or any 

objects sensitive to heat and moisture.

•  Shortly after switching on the machine, hot water and steam may 

escape from the group head and steam wand, even without any 

function selected. Therefore, always ensure that the drip tray and / 

or a suited vessel is placed under the group head and steam wand, 

before switching on the machine.

•  Only use the dark handles for moving the steam wand and the fil-

ter holder during operation and shortly thereafter. Always direct the 

steam wand into a vessel or to the drip tray, when it is not in use.

•  Only use heat-resistant vessels with the appliance to avoid damage and 

severe injuries due to splinters and hot liquids. 

For texturing milk, do 

Содержание Design Espresso Barista Pro








































Отзывы: