EN
EN
46
47
NOTE
The selected setting will be kept until you shut off and/or unplug the machine. If
you wish to keep your setting permanently, touch the plus sign on the navigation
bar (see: ‘Entering Your Own Settings’).
5.
Making your drink:
Direct the steam wand into your cup and touch the cup
icon. The water starts flowing and your cup is filled with the selected amount of
hot water.
WARNING
– The steam wand is very hot after usage. Before touching the
metal parts of the steam wand with your skin, ensure that these parts cooled down
sufficiently.
6.
Cleaning the steam wand:
Wipe the steam wand via a moist cloth for removing
splashes of your drink.
NOTE
The espresso machine is not suited for giving off large amounts (caraffes) of hot
water. The more water you take, the lower the temperature of the water.
ENTERING YOUR OWN SETTINGS
Various settings of the machine can be changed and adapted to your likings within
practical ranges. These are:
•
Values for grinding:
The grind size and the amount of ground coffee powder
(see: ‘Setting Up the Grinder’).
•
Values for making your drinks:
extraction volume, extraction temperature, tex-
ture (froth quality) of the milk, water volume for brewing tea.
•
Operating data:
Several settings influencing the general way of operation can
be changed. These are: language of displayed texts, brightness of the screen,
usage of acoustic signals, time, water hardness.
NOTE
When changing any values for preparing your drinks, your new settings will be
active until you switch off the appliance. If you wish to keep your new settings
permanently, you can save them to memory as new “Default” or via the option
“MyProfile” (see: ‘Saving Your Own Settings’). Changes of the operating data will
always be active until you change them again.
You can reset all your individual settings to the factory settings of the machine (see:
‘Resetting the Machine to Factory Settings’). The only exception is the grind size.
This value is changed via a mechanically operated dial at the right side panel of
the machine.
SETTING UP THE GRINDER
You may adjust the grinder according to your likings for getting your preferred coffee
taste. For this, the grind size and the grinding amount can be changed.
Adjusting the Grind Size
CAUTION
– Only adjust the grind size, while the grinder is operating to
avoid damage to the grinder.
The machine provides the instructions for setting the grind size. Select the command
“Guide und Setting / Guide and Info / Grinding Guide / Adjusting Grinding”.
Leaf through the pages via the “Next” button and the arrow in the navigation bar
(1 step back). Some useful tips for adjusting the grind size are given also in chapter
‘Tips for Best Results’.
IMPORTANT -
We strongly recommend to set the grind size between 5 and 10.
Do not use the finer grind size settings (1-4) and the coarsest grind size (11) to
keep a long lifetime of the grinder. However, after several years of operation it
may be useful to select a finer grind size below 5, when the mills are remarkably
worn.
The grind size dial is located at the right side panel of the appliance below the
bean hopper. On delivery the grind size 8 is set. This position is marked via a dot.
1. Select a coffee-based drink for displaying the control area holding the bean icon
(e.g. “Coffee Beverages / Espresso / 2 cups”).
2. Place the milk jug below the grinder outlet. Then touch the bean icon on the
screen. While the grinder operates, turn the grind size dial to the desired positi-
on. For this, observe the bean icons (large and small) beside the grind size dial.
When turning the dial to the large bean icon, you will get a higher setting and
coarser grind size.
NOTE
We recommend to change the grind size in small steps (one cog). Because of the
reminders that are left within the grinder after each grinding action, you should let
the grinder deliver 5-6 portions, before reviewing the result.
