EN
EN
50
51
•
The water temperature:
The brewing temperature for all espresso functions can
be selected on a dedicated page. This value affects all drinks with coffee as
well and is always kept in memory until you change it again (see: ‘Changing the
Coffee Temperature’). The brewing temperatures of the tea functions are selected
via the different tea types (see: ‚Properties of Your Espresso Machine / Tea and
Hot Water with Various Temperatures‘). There is no way to change these values.
Changing the Volume
For the brewing function for coffee or tea, 4 different volume settings (amounts of water,
“Size”) may be selected on the appropriate settings page (see: ‘Design of the Screen-
Based Control / The Settings Page’). Additionally, the brewing funcitons can be control-
led manually. For this, set the “Size” on the setting page to the maximum value (“Extra
Long”). Then start the brewing function via the cup icon. When the desired amount is
reached, touch the “Stop” button for terminating the brewing function.
NOTE
For the various coffee-based beverages the pre-defined extraction volumes may
differ from each other, because the mixture is essential for making a special beve-
rage. We recommend to use the pre-defined values first and check the result,
before making any changes.
Changing the Coffee Temperature
You can select 4 different temperature levels for your espresso temperature: “Low”,
“Medium”, “High”, and “Max”. The selected temperature level affects the taste of
your coffee.
IMPORTANT - The set temperature level is effective for all coffee drinks in com-
mon. It is kept permanently in memory automatically. The actual espresso tem-
perature for brewing your coffee drinks may differ from each other, depending
on the selected drink. The default value (“Low” = 70-74°C) is optimized for
most brands of coffee. Normally, you should keep this setting. Your setting will
always be kept im memory permanently until you change it again.
Level
Temperature
Low
70-74°C (158-165 °F)
Medium
72-76°C (165-169 °F)
High
74-78°C (165-172 °F)
Max
76-80°C (169-176 °F
1. Select the command “Guide and Setting / Settings / Coffee temperature”.
2. Touch the buttons “+” or “–” for selecting a higher or lower temperature level.
3. Via the arrow in the navigation bar you get back to the previous page (“Set-
tings”). The home icon leads back directly to the home page.
SAVING YOUR SETTINGS PERMANENTLY
You can change various values for your drink independently from other drinks. Most
of these settings must be saved explicitly, if they shall be kept in memory permanent-
ly even after switching off and unplugging the appliance. Two ways are provided
for saving your settings:
•
Default values:
After switching on, the machine starts always with the default
values. There is a complete set of default values for each drink. You can over-
write these factory settings (see: ‘Saving New Default Values’).
•
Individual Drinks (“MyProfile”):
Via this function your individual settings for a
drink will be saved as a new drink (see: ‘Saving a New Drink’).
Selecting the Desired Option
1. Display the page of the drink you wish to use as a pattern for your own settings
(see: ‘Operation / Selecting a drink’). Change one or more values for this drink
(see: ‘Design of the Screen-Based Control / The Settings Page’). Then, via the
arrow in the navigation bar return to the drink page.
2. Touch the plus sign at the bottom of the navigation bar. The selection page of
the memory function is shown, where you find the options “Save as default” and
“Save as MyProfile”.
3. Touch the desired option.
Saving New Default Values
4. On the selection page of the memory function, select “Save as default”.
A message confirms your selection and your changes are saved as the new default
values for this drink. Thereafter, the drinks page is shown again. Every time you
switch on the appliance your settings will be used as default values for the appro-
priate beverage, until you use this option for saving a new set of default values for
this beverage.
