Garmin GPSMAP 8X10 Скачать руководство пользователя страница 60

Страница: 60 / 110

Radar Interpretation

Reading and interpreting the radar display takes practice.
The more you use the radar, the better you will become at
relying on the radar display when you really need it.
Radar can be useful in many situations, such as avoiding
collisions when you have limited visibility, for example
when it is dark or foggy, tracking weather, seeing what
is ahead of you, and locating birds and fish.
The radar overlay feature can help you interpret the
radar display more easily, because it overlays the radar
returns on top of the chart. This can help you identify
the difference between a radar return of a land mass,
bridge, or rain cloud. Showing the AIS vessels on the
radar overlay can also help you identify features on the
radar display.
In the screenshot below, the radar overlay is turned on.
This screen also shows a video feed. We can easily
identify a few items on the radar screen.

Land

Vessel

Radar Overlay

When you connect your chartplotter to an optional Garmin
marine radar, you can use overlay radar information on
the Navigation chart or on the Fishing chart.
Data appears on the radar overlay based on the most
recently used radar mode and all settings configurations
applied to the radar overlay are also applied to the last-
used radar mode.

Radar Overlay and Chart Data Alignment

When using the Radar overlay, the chartplotter aligns
radar data with chart data based on the boat heading,
which is based by default on data from a magnetic
heading sensor connected using a NMEA

0183 or NMEA

2000 network. If a heading sensor is not available, the
boat heading is based on GPS tracking data.
GPS tracking data indicates the direction in which the boat
is moving, not the direction in which the boat is pointing. If
the boat is drifting backward or sideways due to a current
or wind, the Radar overlay may not perfectly align with
the chart data. This situation should be avoided by using
boat-heading data from an electronic compass.
If the boat heading is based on data from a magnetic
heading sensor or an automatic pilot, the heading data
could be compromised due to incorrect setup, mechanical
malfunction, magnetic interference, or other factors. If the

heading data is compromised, the Radar overlay may not
align perfectly with the chart data.

Transmitting Radar Signals

NOTE:

As a safety feature, the radar enters standby mode

after it warms up. This gives you an opportunity to verify
the area around the radar is clear before beginning radar
transmission.

With the chartplotter off, connect your radar as
described in the radar installation instructions.

Turn on the chartplotter.
If necessary, the radar warms up and a countdown
alerts you when the radar is ready.

Select

Radar

Select a radar mode.
A countdown message appears while the radar is
starting up.

Select

Options

Transmit Radar

Stopping the Transmission of Radar Signals

From a radar screen, select

Options

Radar To

Standby

TIP:

Press >

Radar To Standby

from any screen to

quickly stop radar transmission.

Setting Up the Timed Transmit Mode

To help conserve power, you can set up time intervals in
which the radar will transmit and not transmit (standby)
signal transmissions.

NOTE:

This feature is not available in dual radar modes.

From a radar screen, select

Options

Radar Options

Timed Transmit

Select

Timed Transmit

to enable the option.

Select

Stdby Time

, enter the time interval between

radar signal transmissions, and select

Done

Select

Transmit Time

, enter the duration of each radar

signal transmission, and select

Done

Enabling and Adjusting a Radar No Transmit Zone

You can indicate areas within which the radar scanner
does not transmit signals.

NOTE:

GMR Fantom and xHD2 radar models support two

no-transmit zones. Most other GMR radar models support
one no-transmit zone. GMR 18 HD+ radar models do not
support no-transmit zones.

From a radar screen, select

Options

Radar Setup

Installation

No Transmit Zone

The no-transmit zone is indicated by a shaded area on
the radar screen.

Select

Angle 1

, and select the new location for the first

angle.

Select

Angle 2

, and select the new location for the

second angle.

Select

Done

If necessary, repeat for the second zone.

Radar

Содержание GPSMAP 8X10















































































































Результаты поиска

Содержание GPSMAP 8X10

Отзывы:

Похожие инструкции для GPSMAP 8X10

Бренды по названию

Популярные бренды

Garmin GPSMAP 8X10, Руководство пользователя

Результаты поиска

Содержание GPSMAP 8X10

Отзывы:

Похожие инструкции для GPSMAP 8X10

Бренды по названию

Популярные бренды